PDA

View Full Version : DVD Burning Problems?


Pages : 1 2 3 4 5 [6]

jackbutler
2006-05-31, 11:21 AM
You shouldn't be transcoding. When you open nero a window should pop up. You need to select dvd video over in the left side column. Once you have done that select new down at the bottom. Once you do that an Explorer window will pop up with your files on the right and an empty window second from the left. You need to locate your video_ts folder that you downloaded in the right window. Once you have done that you need to drag the files that are inside your video_ts folder over to the empty window that is second from the left (in the far left window you should see an audio_ts & video_ts folder). Once you have done that you are ready to burn :)

sjoseph
2006-05-31, 12:48 PM
I did all that; but I got a "reallocation problem" and then a "compliance error"...uggghhh..i've used Nero for audio burning for years, but this dvd stuff is gettin' to me!

TheMamba
2006-05-31, 12:57 PM
http://www.thetradersden.org/forums/showthread.php?t=21231&highlight=nero+dvd

schmoe75
2006-05-31, 09:43 PM
you need to get rid of Nero...............ONES (http://www.cdr-zone.com/software/dvd_burning/ones.html) :thumbsup

ffooky
2006-06-01, 09:57 AM
If you have Toast then you can use that but as you already have ffmpegX up and running you can achieve equally satisfactory results.

Unfortunately, MPG covers a multitude of sins and it's necessary to determine the exact nature of the files that you have. You need to know whether they are MPEG 1 or MPEG 2, what resolution & standard (i.e.PAL or NTSC), what codec has been used for the audio and what bitrate/sample rate it is.

You can glean this info from ffmpegX but I'd recommend MPEG Streamclip. Open each of the files in turn and go File->Show Stream Info (cmd-I).

Copy/paste the info box for all your files, see if the audio & video properties are the same for all and report the data back here.

calvin1663
2006-06-02, 03:31 PM
alright ffooky, thanks for the help, here's what I've gathered:

Stream: JGB 11-12-91 d1.mpg
Type: MPEG program stream

Duration: 0:53:26
Data Size: 532.95 MB
Bit Rate: 1.39 Mbps

Video Tracks:
224 MPEG-1, 352 240, 29.97 fps, 1.15 Mbps

Audio Tracks:
192 MP2 stereo, 44.1 kHz, 224 kbps

Stream Files:
JGB 11-12-91 d1.mpg (532.95 MB)




thanks, calvin

ffooky
2006-06-02, 04:52 PM
Righto,
What you have are VCD standard MPEG files. Less than stellar quality obviously but the good news is you don't have to re-encode the video track in order to burn them to DVD. The audio will need to be upsampled to 48 kHz...in my experience this can lead to sync issues, at least using Toast but you may well get better results with ffmpegX.

Unfortunately, no one step method of passing the video through/upsampling the audio with ffmpegX would work other than the svcdvd option from the Tools tab, for which you need to register ($15). Small beer for supporting a great developer but free would be nicer.

You can mimic the process by demuxing your MPG files (Tools tab->demux) and then dropping the resultant MP2 file on the main window and selecting Audio file to MP2 in the target format.

Back at the Tools tab, select mux, navigate to the M1V file created earlier when you demuxed as the video and your upsampled MP2 for the audio 1 (ignore audio 2). Select DVD as your multiplexing option and let her rip.

It would probably be a good idea to test whether there are any nasty synhing issues on a smaller MPEG1 file first.

HTH

ffooky
2006-06-02, 05:50 PM
One more thing, are you sure your old man's DVD player can't play unauthored MPEG's ?

calvin1663
2006-06-02, 06:48 PM
hmmm possibly not, how do I author?

other than that, ffmpegx is registered, so I can do that with the tools thingy

btw---nice sig :D

ffooky
2006-06-02, 06:54 PM
Authoring is just a posh word for knocking a raw MPEG file into a VCD, SVCD or DVD.

If you're registered then the tools thingy route is definitely the most painless method. I'd be interested to know how things go with the synching.

Regarding the sig...I've had no complaints yet, but then again I'm a compulsive liar ;)

calvin1663
2006-06-02, 08:13 PM
hmm seems that I actually dont have a reg. for ffmpegx, i was thingking of a different app...will toast do it? here are the other apps that *might* do the job, they're somewhat video-related, will any work?

avid free DV
flip4mac
imovie, imovie HD
idvd
ivcd
toast 7


cheers, calvin

ffooky
2006-06-02, 08:27 PM
Toast 7 is the only one of those that'll do the trick, though you may encounter johnny sync issue.

I'm on my kids' (G3) machine at the mo but from memory you need to go to Toast's Video tab and select DVD-Video. At the bottom of the options drawer you can select Custom or, er...something else. Select custom and at the next window opt to re-encode video never. IIRC you don't get an option to bang the MP2 audio up to 48 kHz, just AC3 or PCM.

In this case I'd go for AC3 but you could use the demuxed and upsampled M1V and MP2 files from the ffmpegX option earlier on if you prefer. As long as they're identically named (apart from the extension) and in the same directory, Toast will automatically associate them with each other.

I know it sounds a tad complicated but stick with it, we'll get Pop his DVD :)

ffooky
2006-06-02, 08:30 PM
...if you go for the M1V + MP2 option, select PCM as the audio option in Toast. It's Toast's indescribably dumb way of signifying passthrough.

ffooky
2006-06-02, 08:37 PM
...Choose to save as a disc image so you can check the results with DVD Player or VLC before blowing a blank. On (slightly inebriated) reflection, you may find that selecting PCM audio with your unmodified MPEG may also lead to a merely upsampled MP2 audio track but, as I said, I can't check this at this moment.

piikea
2006-06-06, 04:18 PM
in my experience, nero is a piece of sh@<hidden>! it is slow, the latest version doesn't allow you to set burn speed & 80% of the time has had problems loading or "analyzing" content or IF it does burn there have been freezing and/or aud/vid out of sync problems.
my P4, 1.4GHz, 384Mb RAM & less than 2 yr old lite-on burner should be adequate so i doubt it's my pc. i had an OEM bundled version which completely sucked. then was dumb enough to get a full retail version & it hasn't been much better. i rarely even try to use it unless i need to add menus/chapters (but it's rarely successful anyway).

Gear dvd & NTI dvd maker have worked for me w/o fail (for the same dvd's that nero had problems with). NTI could not be simpler to use & start to finish burns in 15 min's or less. (note: no menu adding capability though or either).

you can try the free dvd shrink of course & just use "no compression" (unless it's needed).

schmoe75
2006-06-06, 07:16 PM
Get ONES (http://www.cdr-zone.com/software/dvd_burning/ones.html) to burn DVD's :thumbsup

Chuffer
2006-06-06, 07:28 PM
Use ONES! itis very good software :D

schmoe75
2006-06-06, 08:58 PM
The BEST (http://www.cdr-zone.com/software/dvd_burning/ones.html) :wave:

:horse:

annajoy
2006-06-09, 12:30 PM
I've been trying to burn this Elliott Smith DVD and the program I'm useing is nero startsmart...so...here's the problem in a nutshell...its only burning half of the DVD and not the whole thing...it says "Failed to read the file %'s"...I've got a copy of the file saved and here's what it said...

********** Nero Recode 2 **********

Version: 2.2.6.16

Hannah Capps
Home


Project type: Copy entire DVD
Target size: DVD5 (2282925)

12:04:20 File LangStreamPatcher.cpp, Line 56
Command table patching started...

12:04:20 File LangStreamPatcher.cpp, Line 133
All tables successfully patched!

Burn settings:
Target: Hard disk folder
Number of copies: 1
Target folder: C:\Documents and Settings\Hannah Capps\My Documents\Nero Recode (25013071872 bytes free)
Shutdown when finished: false
Advanced Analysis: false
Compress Adaptive: false

12:04:24 File burn_dvdfiles.cpp, Line 231
Compile DVD: init

VMG Menus Vobs [40 vobus] 0.19MB -> 0.19MB [R 1.00]
Video: 0.10MB, extra: 0.08MB
Audio: 0 streams
Subpicture: 1 streams
0. 0. Unspecified 0.01MB [enabled]

VTS_01 Title Vobs [6479 vobus] 3993.21MB -> 3993.21MB [R 1.00]
Video: 3335.68MB, extra: 657.52MB
Audio: 1 streams
0. 0. LPCM 2-ch Unspecified 644.87MB [enabled]
Subpicture: 0 streams

12:04:26 File burn_dvdfiles.cpp, Line 1152
Compile DVD: begin copy 1

12:04:26 File NeroRecorder.cpp, Line 122
Writing to harddrive folder started

12:04:26 File burn_dvdfiles.cpp, Line 479
Compile DVD: burning 2282925 sectors (2044689 required)

12:04:26 File burn_dvdfiles.cpp, Line 656
Compile DVD: adjust target size to 4458.84MB (3993.53MB obtained)

12:04:26 File burn_dvdfiles.cpp, Line 524
Compiling DVD Volume started

12:04:27 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VMG Menus Vobs

VMG Menus Vobs:
Original 0.19MB -> Expected 0.19MB -> Output 0.19MB
Finished error 0.00MB
Ratio encoded = 0
Original encoded = 40
Slide encoded = 0
StillImage encoded = 0
Output extra size = 0.08MB
Source video size = 0.10MB
Pictures Modified [I 0] [P 0] [B 0]

12:27:17 File burn_dvdfiles.cpp, Line 381
Failed to read from the file ^.

12:27:17 File burn_dvdfiles.cpp, Line 382
Compiling DVD volume failed

12:27:17 File burn_dvdfiles.cpp, Line 301
Compile DVD: exit

12:27:17 File burner.cpp, Line 961
Failed to read from the file ߯.



So...does anyone know what the problem is? Cause I'm clueless... :hmm:

skodechoker
2006-06-09, 12:56 PM
you may want to edit this post, you just posted your registration code

jdawson
2006-06-09, 01:05 PM
have you tried using the dvd burning rom instead? I've never had luck with the start smart part of it yet--except for audio discs.

annajoy
2006-06-09, 01:21 PM
have you tried using the dvd burning rom instead? I've never had luck with the start smart part of it yet--except for audio discs.

How do I burn directly from the rom? (sorry clueless dummy here)... :hmm:

jdawson
2006-06-09, 01:58 PM
I sent instructions, if I'm not clear--which is usually what happens--try this site

http://www.dvd-guides.com/content/view/40/59/

annajoy
2006-06-09, 03:46 PM
I sent instructions, if I'm not clear--which is usually what happens--try this site

http://www.dvd-guides.com/content/view/40/59/


I purchased a Comp USA DVD RW Drive...in it came the Bundle Nero 6 stuff...in the drop down menu when I hit start>Nero>there isn't an option for Nero Burning ROM...so uh...I did a surch on my comp and found the instructions for it...but no burning ROM interface...so uh...what do I do now?

ps. are you on aim, yahoo or msn? If so maby you could help walk me through this...

AIM=Hannah Capps
MSN=Hannahjoycapps@<hidden>
YAHOO=hjanna_hc

hope to hear from you soon...

jdawson
2006-06-10, 09:27 AM
when i do programs>nero I get three options. Toolkit, startsmart and nero 6 ultra edition. Mine is in the ultra edition, along with 6 other things.

annajoy
2006-06-10, 05:53 PM
there appeares to be something wrong with the dvd that I'm trying to burn...it always stops at 25% and then dosn't move after that...here's the log file:

I 16:32:07 DVD Decrypter Version 3.5.4.0 started!
I 16:32:07 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2)
I 16:32:07 Initialising SPTI...
I 16:32:07 Searching for SCSI / ATAPI devices...
I 16:32:08 Found 1 CD-ROM, 1 CD-RW and 1 DVDRW!
I 16:32:26 Operation Started!
I 16:32:26 Source Device: [0:0:0] ATAPI DVD DD 8X16X8X16 GSLB (F:) (USB)
I 16:32:26 Source Media Type: DVD+R (Disc ID: CMC MAG-E01-00)
I 16:32:26 Source Media Region Code: 1, 2, 3, 4, 5, 6, 7, 8
I 16:32:26 Source Media Copyright Protection System Type: None
I 16:32:26 Source Media Implementation Identifier: roxio EasyCDCreator
I 16:32:26 Destination Folder: C:\031026_1350\VIDEO_TS\
I 16:32:26 File Splitting: By File
I 16:32:26 Detect Mastering Errors: No
I 16:32:26 Multi Angle Processing: No
I 16:32:26 Remove Macrovision Protection: Yes
I 16:32:26 Stream Processing: No
I 16:32:29 Copying VIDEO_TS.IFO... (LBA: 286 - 296) - KEY: N/A
I 16:32:29 Copying VIDEO_TS.VOB... (LBA: 297 - 392) - KEY: N/A
I 16:32:29 Copying VIDEO_TS.BUP... (LBA: 275 - 285) - KEY: N/A
I 16:32:30 Copying VTS_01_0.IFO... (LBA: 418 - 442) - KEY: N/A
I 16:32:30 Copying VTS_01_1.VOB... (LBA: 443 - 500459) - KEY: N/A
I 16:51:09 Copying VTS_01_2.VOB... (LBA: 500460 - 1000761) - KEY: N/A

by the 3rd VOB file it stops...I can't for the life of me figure out why it does this...this is the 5/7/03 Elliott Smith DVD and I've been trying to copy it for the longest time...I've swipped my comp clean 2 times in the hopes that it would take, but it hasn't...it plays just fine...its the burning of it thats the problem...so are there any people out there that know what might be going on...cause I shure don't... :disbelief

jdawson
2006-06-10, 06:43 PM
if you have dvd decrypter, have you tried ripping it as an ISO and burning it that way? I have one or two dvd's that that is the only way I can rip them. same deal, reads fine, ripping just doesn't happen unless it's in ISO.

Also, try running it through CD check and see if it comes up with any kind of errors. cd check is freeware, and it will rip it. If there are errors you will get a log-file telling you what it ran into. also it will repeatedly try and read that sector to get at least one clean pull.

annajoy
2006-06-10, 09:58 PM
I'm still running it through the cd checker...but here's the error thats showing up:

error;win32;Data error (cyclic redundancy check). (code:23);F:\VIDEO_TS\VTS_01_2.VOB

so what does this mean?

:wtf:

Trader Dave
2006-06-10, 10:08 PM
I'm still running it through the cd checker...but here's the error thats showing up:

error;win32;Data error (cyclic redundancy check). (code:23);F:\VIDEO_TS\VTS_01_2.VOB

so what does this mean?

:wtf:CRC errors are usually the machine telling you that it is having problems trying to read or write the files!

jdawson
2006-06-10, 10:59 PM
yep but I also think it means it's a bad burn too.

usually there isn't anything you can do about those. try and find where you got it from to replace it.

U2Lynne
2006-06-10, 11:11 PM
Jude, I miss you! :wave: :wave:

jdawson
2006-06-11, 09:50 AM
:wave: Lynne how's it going?

glad to see the old avatar back :thumbsup

annajoy
2006-06-11, 12:09 PM
so uh...how do you make an ISO image with out spending insane amounts of cash...I guess I'd have to use nero... :disbelief

jdawson
2006-06-11, 02:15 PM
dvd decrypter, up top there is the option of modes. (IFO, ISO, file)

choose ISO to rip it and you should be able to use decrypter to read and write it.

I'm not sure it will work though, whenever I have that cyclic redundancy error, I usually cannot copy the full file to the pc. If possible, contact whoever sent it to you and see if you can get a new one. I think if it was possible to copy that cd check would have done it (did you try the recover button?)

boredwhitelighter
2006-06-12, 04:38 PM
there is a weird difference in the way different programs and different computers read how big a file is , if you have checked the file plays fully then i would not worry to much about what size it says it is ( different ways of calculating the file sizes )

and i like toast been using it for years , toast as well as other programs should tell you easily enough if you have enough space on the disc

apple macs should just be able to copy with no problems , but if it says there is not enough room on the disc then you have little chance as it knows the real disc and file sizes
my guess is the only real chance you have to keep the original size is if there is extra files you can leave out ? or i think you will have fun ?

annajoy
2006-06-12, 07:33 PM
dvd decrypter, up top there is the option of modes. (IFO, ISO, file)

choose ISO to rip it and you should be able to use decrypter to read and write it.

I'm not sure it will work though, whenever I have that cyclic redundancy error, I usually cannot copy the full file to the pc. If possible, contact whoever sent it to you and see if you can get a new one. I think if it was possible to copy that cd check would have done it (did you try the recover button?)

I did try the recover button...and nothing happened...well it shut down on me but that was it...I can't get another copy of this dvd from the person I got it from as there busy all the time...so...I've attached the Nero Log file to see if that will help...I shure hope it does... :(


Hannah Capps
Home


Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4d
(Nero Express)
Recorder: <ATAPI DVD DD 8X16X8X16> Version: GSLB - HA 1 TA 1 - 6.6.1.4
Adapter driver: <USB 1.0> HA 1
Drive buffer : 2048kB
Bus Type : set to ATAPI (3) -> ATAPI, detected: ?
CD-ROM: <ATAPI DVD DD 8X16X8X16>Version: GSLB - HA 1 TA 1 - 6.6.1.4
Adapter driver: <USB 1.0> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : IC25N030ATMR04-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SAMSUNG CD-ROM SN-124 atapi Port 0 ID 1 DMA: Off

=== CDRom-Device-Map ===
SAMSUNG CD-ROM SN-124 D: CDRom0
IOMEGA CDRW86522EXT3-B E: CDRom2
ATAPI DVD DD 8X16X8X16 F: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 255MB (261592kB)
Free physical memory: 32MB (33692kB)
Memory in use : 87
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

10.6.2006
CD-ROM (ISO)
3:56:27 PM #1 Text 0 File Isodoc.cpp, Line 6475
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

3:56:27 PM #2 Text 0 File Burncd.cpp, Line 3012
ATAPI DVD DD 8X16X8X16
Seamless Link activated

3:56:28 PM #3 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 39936KB of Memory

3:56:28 PM #4 Text 0 File Reader.cpp, Line 124
Reader running

3:56:29 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

3:56:29 PM #6 Text 0 File Burncd.cpp, Line 3305
Turn on Track-At-Once, using CD-R/RW media

3:57:03 PM #7 Phase 40 File dlgbrnst.cpp, Line 1685
Aborted by user

3:57:03 PM #8 Text 0 File DlgWaitCD.cpp, Line 281
Disc check failed: Medium not allowed (Wrong CD)

3:57:03 PM #9 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)

3:57:03 PM #10 Text 0 File DlgWaitCD.cpp, Line 2612
Recorder: ATAPI DVD DD 8X16X8X16
Medium not present

3:57:03 PM #11 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Compilation cannot be written on that medium type.
(Medium in drive: DVD+R. Medium required by compilation: CD-R/RW.)


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
Hannah Capps
Home
1A20-8203-0130-2355-9255-2220*

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4d
(Nero Express)
Recorder: <IOMEGA CDRW86522EXT3-B> Version: QOP3 - HA 1 TA 2 - 6.6.1.4
Adapter driver: <USB 1.0> HA 1
Drive buffer : 2048kB
Bus Type : set to ATAPI (3) -> ATAPI, detected: ?
CD-ROM: <ATAPI DVD DD 8X16X8X16>Version: GSLB - HA 1 TA 1 - 6.6.1.4
Adapter driver: <USB 1.0> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : IC25N030ATMR04-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SAMSUNG CD-ROM SN-124 atapi Port 0 ID 1 DMA: Off

=== CDRom-Device-Map ===
SAMSUNG CD-ROM SN-124 D: CDRom0
IOMEGA CDRW86522EXT3-B E: CDRom2
ATAPI DVD DD 8X16X8X16 F: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 255MB (261592kB)
Free physical memory: 18MB (18892kB)
Memory in use : 92
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

10.6.2006
CD-ROM (ISO)
3:59:46 PM #1 Text 0 File Isodoc.cpp, Line 6475
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

3:59:46 PM #2 Text 0 File Burncd.cpp, Line 3012
IOMEGA CDRW86522EXT3-B
Buffer underrun protection activated

3:59:46 PM #3 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 39936KB of Memory

3:59:46 PM #4 Text 0 File Reader.cpp, Line 124
Reader running

3:59:46 PM #5 Text 0 File Writer.cpp, Line 122
Writer IOMEGA CDRW86522EXT3-B running

3:59:46 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

3:59:47 PM #7 Text 0 File Burncd.cpp, Line 3305
Turn on Track-At-Once, using CD-R/RW media

4:00:44 PM #8 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 359845 ( 79:59.70)
Last address to be written: 647 ( 0:10.47)

4:00:44 PM #9 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)

4:00:44 PM #10 Text 0 File DlgWaitCD.cpp, Line 2612
Recorder: IOMEGA CDRW86522EXT3-B;
CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation
ATIP Data:
Special Info [hex] 1: D0 00 98, 2: 61 1A 42 (LI 97:26.66), 3: 4F 3B 47 (LO 79:59.71)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)

4:00:44 PM #11 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Compilation cannot be written on that medium type.
(Medium in drive: CD-ROM. Medium required by compilation: CD-R/RW.)

4:00:44 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 648 (648) = #648/0:8.48
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 646 blocks [IOMEGA CDRW86522EXT3-B]
--------------------------------------------------------------

4:00:44 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [IOMEGA CDRW86522EXT3-B] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 1634304, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
648 | lead-out | 1 | 0x41 | 0x00

4:00:44 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1127
Removed 2 run-out blocks from end of track 1. Length: 648 -> 646.

4:00:44 PM #15 Text 0 File SCSIPassThrough.cpp, Line 38
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

4:00:44 PM #16 Text 0 File SCSIPassThrough.cpp, Line 83
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

4:00:44 PM #17 Phase 24 File dlgbrnst.cpp, Line 1685
Caching of files started

4:00:44 PM #18 Text 0 File Burncd.cpp, Line 4145
Cache writing successful.

4:00:44 PM #19 Phase 25 File dlgbrnst.cpp, Line 1685
Caching of files completed

4:00:44 PM #20 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 52x (7,800 KB/s)

4:00:44 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

4:00:44 PM #22 Text 0 File Mmc.cpp, Line 21840
Set BUFE: Buffer underrun protection -> ON , SMART-BURN : ON

4:00:57 PM #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

4:00:59 PM #24 Text 0 File Mmc.cpp, Line 16608
<IOMEGA CDRW86522EXT3-B > start Close Session

4:01:12 PM #25 Phase 37 File dlgbrnst.cpp, Line 1685
Burn process completed successfully at 52x (7,800 KB/s)


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
Hannah Capps
Home
1A20-8203-0130-2355-9255-2220*

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4d
(Nero Express)
Recorder: <IOMEGA CDRW86522EXT3-B> Version: QOP3 - HA 1 TA 2 - 6.6.1.4
Adapter driver: <USB 1.0> HA 1
Drive buffer : 2048kB
Bus Type : set to ATAPI (3) -> ATAPI, detected: ?
CD-ROM: <ATAPI DVD DD 8X16X8X16>Version: GSLB - HA 1 TA 1 - 6.6.1.4
Adapter driver: <USB 1.0> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : IC25N030ATMR04-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SAMSUNG CD-ROM SN-124 atapi Port 0 ID 1 DMA: Off

=== CDRom-Device-Map ===
SAMSUNG CD-ROM SN-124 D: CDRom0
IOMEGA CDRW86522EXT3-B E: CDRom2
ATAPI DVD DD 8X16X8X16 F: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 255MB (261592kB)
Free physical memory: 20MB (21368kB)
Memory in use : 91
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

10.6.2006
CD-ROM (ISO)
4:08:43 PM #1 Text 0 File Isodoc.cpp, Line 6475
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

4:08:43 PM #2 Text 0 File Burncd.cpp, Line 3012
IOMEGA CDRW86522EXT3-B
Buffer underrun protection activated

4:08:43 PM #3 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 39936KB of Memory

4:08:43 PM #4 Text 0 File Reader.cpp, Line 124
Reader running

4:08:43 PM #5 Text 0 File Writer.cpp, Line 122
Writer IOMEGA CDRW86522EXT3-B running

4:08:44 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

4:08:44 PM #7 Text 0 File Burncd.cpp, Line 3305
Turn on Track-At-Once, using CD-R/RW media

4:08:46 PM #8 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 359845 ( 79:59.70)
Last address to be written: 600 ( 0:10.00)

4:08:46 PM #9 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)

4:08:46 PM #10 Text 0 File DlgWaitCD.cpp, Line 2612
Recorder: IOMEGA CDRW86522EXT3-B;
CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation
ATIP Data:
Special Info [hex] 1: D0 00 98, 2: 61 1A 42 (LI 97:26.66), 3: 4F 3B 47 (LO 79:59.71)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)

4:08:46 PM #11 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================

4:08:46 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 601 (601) = #601/0:8.1
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 599 blocks [IOMEGA CDRW86522EXT3-B]
--------------------------------------------------------------

4:08:47 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [IOMEGA CDRW86522EXT3-B] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 1538048, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
601 | lead-out | 1 | 0x41 | 0x00

4:08:47 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1127
Removed 2 run-out blocks from end of track 1. Length: 601 -> 599.

4:08:47 PM #15 Text 0 File SCSIPassThrough.cpp, Line 38
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

4:08:47 PM #16 Text 0 File SCSIPassThrough.cpp, Line 83
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

4:08:47 PM #17 Phase 24 File dlgbrnst.cpp, Line 1685
Caching of files started

4:08:47 PM #18 Text 0 File Burncd.cpp, Line 4145
Cache writing successful.

4:08:47 PM #19 Phase 25 File dlgbrnst.cpp, Line 1685
Caching of files completed

4:08:47 PM #20 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 52x (7,800 KB/s)

4:08:48 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

4:08:49 PM #22 Text 0 File Mmc.cpp, Line 21840
Set BUFE: Buffer underrun protection -> ON , SMART-BURN : ON

4:09:03 PM #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

4:09:04 PM #24 Text 0 File Mmc.cpp, Line 16608
<IOMEGA CDRW86522EXT3-B > start Close Session

4:09:17 PM #25 Phase 37 File dlgbrnst.cpp, Line 1685
Burn process completed successfully at 52x (7,800 KB/s)


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
Hannah Capps
Home
1A20-8203-0130-2355-9255-2220*

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4d
(Nero Express)
Recorder: <IOMEGA CDRW86522EXT3-B> Version: QOP3 - HA 1 TA 2 - 6.6.1.4
Adapter driver: <USB 1.0> HA 1
Drive buffer : 2048kB
Bus Type : set to ATAPI (3) -> ATAPI, detected: ?
CD-ROM: <SAMSUNG CD-ROM SN-124 >Version: N001 - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : IC25N030ATMR04-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SAMSUNG CD-ROM SN-124 atapi Port 0 ID 1 DMA: Off

=== CDRom-Device-Map ===
SAMSUNG CD-ROM SN-124 D: CDRom0
IOMEGA CDRW86522EXT3-B E: CDRom2
ATAPI DVD DD 8X16X8X16 F: CDRom1
=======================

annajoy
2006-06-12, 07:38 PM
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 255MB (261592kB)
Free physical memory: 28MB (29112kB)
Memory in use : 88
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

12.6.2006
Audio CD
1:08:33 AM #1 CDADOC -1 File Cdadoc.cpp, Line 1456
Audio item log info:
Audio document burn settings:
=============================
Burn mode: DAO,
CD Text: On,
Cache disk or network files: No,
Cache small files: No,
Cache files smaller than 65536 bytes.
Audio Multisession: No
List of audio tracks:
=====================
Track 01: Length: 02:40.64, Pause frames: 150, Filters: 1, Name: '1.wav'.
Track 02: Length: 02:38.43, Pause frames: 000, Filters: 1, Name: '2.wav'.
Track 03: Length: 04:16.18, Pause frames: 000, Filters: 1, Name: '3.wav'.
Track 04: Length: 03:20.50, Pause frames: 000, Filters: 1, Name: '4.wav'.
Track 05: Length: 03:30.61, Pause frames: 000, Filters: 1, Name: '5.wav'.
Track 06: Length: 02:21.70, Pause frames: 000, Filters: 1, Name: '6.wav'.
Track 07: Length: 03:33.33, Pause frames: 000, Filters: 1, Name: '7.wav'.
Track 08: Length: 02:48.13, Pause frames: 000, Filters: 1, Name: '8.wav'.
Track 09: Length: 03:39.05, Pause frames: 000, Filters: 1, Name: '9.wav'.
Track 10: Length: 03:56.49, Pause frames: 000, Filters: 1, Name: '10.wav'.
Track 11: Length: 04:19.14, Pause frames: 000, Filters: 1, Name: '11.wav'.
Track 12: Length: 02:26.46, Pause frames: 000, Filters: 1, Name: '12.wav'.
Track 13: Length: 02:45.26, Pause frames: 000, Filters: 1, Name: '13.wav'.
Track 14: Length: 03:28.57, Pause frames: 000, Filters: 1, Name: '14.wav'.
Track 15: Length: 03:24.64, Pause frames: 000, Filters: 1, Name: '15.wav'.
Track 16: Length: 02:32.09, Pause frames: 000, Filters: 1, Name: '16.wav'.
Track 17: Length: 02:58.41, Pause frames: 000, Filters: 1, Name: '17.wav'.
Track 18: Length: 04:28.73, Pause frames: 000, Filters: 1, Name: '18.wav'.
Track 19: Length: 02:27.29, Pause frames: 000, Filters: 1, Name: '19.wav'.
Track 20: Length: 01:38.73, Pause frames: 000, Filters: 1, Name: '20.wav'.
Track 21: Length: 03:32.01, Pause frames: 000, Filters: 1, Name: '21.wav'.
Total size: 66:51.14

1:08:33 AM #2 Text 0 File Burncd.cpp, Line 3012
IOMEGA CDRW86522EXT3-B
Buffer underrun protection activated

1:08:33 AM #3 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 39936KB of Memory

1:08:33 AM #4 Text 0 File Reader.cpp, Line 124
Reader running

1:08:33 AM #5 Text 0 File Writer.cpp, Line 122
Writer IOMEGA CDRW86522EXT3-B running

1:08:33 AM #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

1:08:33 AM #7 Text 0 File Burncd.cpp, Line 3305
Turn on Disc-At-Once, using CD-R/RW media

1:08:35 AM #8 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 359845 ( 79:59.70)
Last address to be written: 300688 ( 66:51.13)

1:08:35 AM #9 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)

1:08:35 AM #10 Text 0 File DlgWaitCD.cpp, Line 2612
Recorder: IOMEGA CDRW86522EXT3-B;
CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation
ATIP Data:
Special Info [hex] 1: D0 00 98, 2: 61 1A 42 (LI 97:26.66), 3: 4F 3B 47 (LO 79:59.71)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)

1:08:35 AM #11 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================

1:08:35 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_AUDIO_NOPRE (1.wav)
2 indices, index0 (150) not provided
original disc pos #0 + 12064 (12064) = #12064/2:40.64
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 12064 blocks [IOMEGA CDRW86522EXT3-B]
1: TRM_AUDIO_NOPRE (2.wav)
2 indices, index0 (0) not provided
original disc pos #0 + 11893 (11893) = #11893/2:38.43
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 11893 blocks [IOMEGA CDRW86522EXT3-B]
2: TRM_AUDIO_NOPRE (3.wav)
2 indices, index0 (0) not provided
original disc pos #0 + 19218 (19218) = #19218/4:16.18
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 19218 blocks [IOMEGA CDRW86522EXT3-B]
3: TRM_AUDIO_NOPRE (4.wav)
2 indices, index0 (0) not provided
original disc pos #0 + 15050 (15050) = #15050/3:20.50
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 15050 blocks [IOMEGA CDRW86522EXT3-B]
4: TRM_AUDIO_NOPRE (5.wav)
2 indices, index0 (0) not provided
original disc pos #0 + 15811 (15811) = #15811/3:30.61
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 15811 blocks [IOMEGA CDRW86522EXT3-B]
5: TRM_AUDIO_NOPRE (6.wav)
2 indices, index0 (0) not provided
original disc pos #0 + 10645 (10645) = #10645/2:21.70
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 10645 blocks [IOMEGA CDRW86522EXT3-B]
6: TRM_AUDIO_NOPRE (7.wav)
2 indices, index0 (0) not provided
original disc pos #0 + 16008 (16008) = #16008/3:33.33
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 16008 blocks [IOMEGA CDRW86522EXT3-B]
7: TRM_AUDIO_NOPRE (8.wav)
2 indices, index0 (0) not provided
original disc pos #0 + 12613 (12613) = #12613/2:48.13
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 12613 blocks [IOMEGA CDRW86522EXT3-B]
8: TRM_AUDIO_NOPRE (9.wav)
2 indices, index0 (0) not provided
original disc pos #0 + 16430 (16430) = #16430/3:39.5
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 16430 blocks [IOMEGA CDRW86522EXT3-B]
9: TRM_AUDIO_NOPRE (10.wav)
2 indices, index0 (0) not provided
original disc pos #0 + 17749 (17749) = #17749/3:56.49
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 17749 blocks [IOMEGA CDRW86522EXT3-B]
10: TRM_AUDIO_NOPRE (11.wav)
2 indices, index0 (0) not provided
original disc pos #0 + 19439 (19439) = #19439/4:19.14
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 19439 blocks [IOMEGA CDRW86522EXT3-B]
11: TRM_AUDIO_NOPRE (12.wav)
2 indices, index0 (0) not provided
original disc pos #0 + 10996 (10996) = #10996/2:26.46
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 10996 blocks [IOMEGA CDRW86522EXT3-B]
12: TRM_AUDIO_NOPRE (13.wav)
2 indices, index0 (0) not provided
original disc pos #0 + 12401 (12401) = #12401/2:45.26
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 12401 blocks [IOMEGA CDRW86522EXT3-B]
13: TRM_AUDIO_NOPRE (14.wav)
2 indices, index0 (0) not provided
original disc pos #0 + 15657 (15657) = #15657/3:28.57
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 15657 blocks [IOMEGA CDRW86522EXT3-B]
14: TRM_AUDIO_NOPRE (15.wav)
2 indices, index0 (0) not provided
original disc pos #0 + 15364 (15364) = #15364/3:24.64
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 15364 blocks [IOMEGA CDRW86522EXT3-B]
15: TRM_AUDIO_NOPRE (16.wav)
2 indices, index0 (0) not provided
original disc pos #0 + 11409 (11409) = #11409/2:32.9
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 11409 blocks [IOMEGA CDRW86522EXT3-B]
16: TRM_AUDIO_NOPRE (17.wav)
2 indices, index0 (0) not provided
original disc pos #0 + 13391 (13391) = #13391/2:58.41
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 13391 blocks [IOMEGA CDRW86522EXT3-B]
17: TRM_AUDIO_NOPRE (18.wav)
2 indices, index0 (0) not provided
original disc pos #0 + 20173 (20173) = #20173/4:28.73
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 20173 blocks [IOMEGA CDRW86522EXT3-B]
18: TRM_AUDIO_NOPRE (19.wav)
2 indices, index0 (0) not provided
original disc pos #0 + 11054 (11054) = #11054/2:27.29
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 11054 blocks [IOMEGA CDRW86522EXT3-B]
19: TRM_AUDIO_NOPRE (20.wav)
2 indices, index0 (0) not provided
original disc pos #0 + 7423 (7423) = #7423/1:38.73
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 7423 blocks [IOMEGA CDRW86522EXT3-B]
20: TRM_AUDIO_NOPRE (21.wav)
2 indices, index0 (0) not provided
original disc pos #0 + 15901 (15901) = #15901/3:32.1
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 15901 blocks [IOMEGA CDRW86522EXT3-B]
--------------------------------------------------------------

1:08:36 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [IOMEGA CDRW86522EXT3-B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 21:
1: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 0 352800 28727328, ISRC ""
2: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 28727328 28727328 56699664, ISRC ""
3: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 56699664 56699664 101900400, ISRC ""
4: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 101900400 101900400 137298000, ISRC ""
5: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 137298000 137298000 174485472, ISRC ""
6: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 174485472 174485472 199522512, ISRC ""
7: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 199522512 199522512 237173328, ISRC ""
8: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 237173328 237173328 266839104, ISRC ""
9: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 266839104 266839104 305482464, ISRC ""
10: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 305482464 305482464 347228112, ISRC ""
11: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 347228112 347228112 392948640, ISRC ""
12: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 392948640 392948640 418811232, ISRC ""
13: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 418811232 418811232 447978384, ISRC ""
14: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 447978384 447978384 484803648, ISRC ""
15: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 484803648 484803648 520939776, ISRC ""
16: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 520939776 520939776 547773744, ISRC ""
17: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 547773744 547773744 579269376, ISRC ""
18: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 579269376 579269376 626716272, ISRC ""
19: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 626716272 626716272 652715280, ISRC ""
20: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 652715280 652715280 670174176, ISRC ""
21: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 670174176 670174176 707573328, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x01 | 0x00
-150 | 1 | 0 | 0x21 | 0x00
0 | 1 | 1 | 0x21 | 0x00
12064 | 2 | 0 | 0x21 | 0x00
12064 | 2 | 1 | 0x21 | 0x00
23957 | 3 | 0 | 0x21 | 0x00
23957 | 3 | 1 | 0x21 | 0x00
43175 | 4 | 0 | 0x21 | 0x00
43175 | 4 | 1 | 0x21 | 0x00
58225 | 5 | 0 | 0x21 | 0x00
58225 | 5 | 1 | 0x21 | 0x00
74036 | 6 | 0 | 0x21 | 0x00
74036 | 6 | 1 | 0x21 | 0x00
84681 | 7 | 0 | 0x21 | 0x00
84681 | 7 | 1 | 0x21 | 0x00
100689 | 8 | 0 | 0x21 | 0x00
100689 | 8 | 1 | 0x21 | 0x00
113302 | 9 | 0 | 0x21 | 0x00
113302 | 9 | 1 | 0x21 | 0x00
129732 | 10 | 0 | 0x21 | 0x00
129732 | 10 | 1 | 0x21 | 0x00
147481 | 11 | 0 | 0x21 | 0x00
147481 | 11 | 1 | 0x21 | 0x00
166920 | 12 | 0 | 0x21 | 0x00
166920 | 12 | 1 | 0x21 | 0x00
177916 | 13 | 0 | 0x21 | 0x00
177916 | 13 | 1 | 0x21 | 0x00
190317 | 14 | 0 | 0x21 | 0x00
190317 | 14 | 1 | 0x21 | 0x00
205974 | 15 | 0 | 0x21 | 0x00
205974 | 15 | 1 | 0x21 | 0x00
221338 | 16 | 0 | 0x21 | 0x00
221338 | 16 | 1 | 0x21 | 0x00
232747 | 17 | 0 | 0x21 | 0x00
232747 | 17 | 1 | 0x21 | 0x00
246138 | 18 | 0 | 0x21 | 0x00
246138 | 18 | 1 | 0x21 | 0x00
266311 | 19 | 0 | 0x21 | 0x00
266311 | 19 | 1 | 0x21 | 0x00
277365 | 20 | 0 | 0x21 | 0x00
277365 | 20 | 1 | 0x21 | 0x00
284788 | 21 | 0 | 0x21 | 0x00
284788 | 21 | 1 | 0x21 | 0x00
300689 | lead-out | 1 | 0x01 | 0x00

1:09:26 AM #14 Text 0 File SCSIPassThrough.cpp, Line 38
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

1:09:26 AM #15 Text 0 File SCSIPassThrough.cpp, Line 83
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

1:09:26 AM #16 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 52x (7,800 KB/s)

1:09:26 AM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, no disc pos, no patch infos, orig at #0): write at #0

1:09:26 AM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #12064

1:09:26 AM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 2 (relocatable, no disc pos, no patch infos, orig at #0): write at #23957

1:09:26 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 3 (relocatable, no disc pos, no patch infos, orig at #0): write at #43175

1:09:26 AM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 4 (relocatable, no disc pos, no patch infos, orig at #0): write at #58225

1:09:26 AM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 5 (relocatable, no disc pos, no patch infos, orig at #0): write at #74036

1:09:26 AM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 6 (relocatable, no disc pos, no patch infos, orig at #0): write at #84681

1:09:26 AM #24 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 7 (relocatable, no disc pos, no patch infos, orig at #0): write at #100689

1:09:26 AM #25 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 8 (relocatable, no disc pos, no patch infos, orig at #0): write at #113302

1:09:26 AM #26 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 9 (relocatable, no disc pos, no patch infos, orig at #0): write at #129732

1:09:26 AM #27 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 10 (relocatable, no disc pos, no patch infos, orig at #0): write at #147481

1:09:26 AM #28 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 11 (relocatable, no disc pos, no patch infos, orig at #0): write at #166920

1:09:26 AM #29 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 12 (relocatable, no disc pos, no patch infos, orig at #0): write at #177916

1:09:26 AM #30 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 13 (relocatable, no disc pos, no patch infos, orig at #0): write at #190317

1:09:26 AM #31 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 14 (relocatable, no disc pos, no patch infos, orig at #0): write at #205974

1:09:26 AM #32 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 15 (relocatable, no disc pos, no patch infos, orig at #0): write at #221338

1:09:26 AM #33 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 16 (relocatable, no disc pos, no patch infos, orig at #0): write at #232747

1:09:26 AM #34 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 17 (relocatable, no disc pos, no patch infos, orig at #0): write at #246138

1:09:26 AM #35 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 18 (relocatable, no disc pos, no patch infos, orig at #0): write at #266311

1:09:26 AM #36 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 19 (relocatable, no disc pos, no patch infos, orig at #0): write at #277365

1:09:26 AM #37 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 20 (relocatable, no disc pos, no patch infos, orig at #0): write at #284788

1:09:27 AM #38 Text 0 File Mmc.cpp, Line 17161
StartDAO : CD-Text - On

1:09:27 AM #39 Text 0 File Mmc.cpp, Line 21840
Set BUFE: Buffer underrun protection -> ON , SMART-BURN : ON

1:09:27 AM #40 Text 0 File Mmc.cpp, Line 17394
CueData, Len=192
21 00 00 41 00 00 00 00
21 01 00 00 00 00 00 00
21 01 01 00 00 00 02 00
21 02 01 00 00 02 2a 40
21 03 01 00 00 05 15 20
21 04 01 00 00 09 25 32
21 05 01 00 00 0c 3a 19
21 06 01 00 00 10 1d 0b
21 07 01 00 00 12 33 06
21 08 01 00 00 16 18 27
21 09 01 00 00 19 0c 34
21 0a 01 00 00 1c 33 39
21 0b 01 00 00 20 30 1f
21 0c 01 00 00 25 07 2d
21 0d 01 00 00 27 22 10
21 0e 01 00 00 2a 13 2a
21 0f 01 00 00 2d 30 18
21 10 01 00 00 31 0d 0d
21 11 01 00 00 33 2d 16
21 12 01 00 00 36 2b 3f
21 13 01 00 00 3b 0c 3d
21 14 01 00 00 3d 28 0f
21 15 01 00 00 3f 13 0d
01 aa 01 01 00 42 33 0e

1:22:36 AM #41 Text 0 File WriterStatus.cpp, Line 116
<IOMEGA CDRW86522EXT3-B > start writing Lead-Out at LBA 300689 (49691h), lenght 0 blocks

1:22:36 AM #42 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

1:22:49 AM #43 Phase 37 File dlgbrnst.cpp, Line 1685
Burn process completed successfully at 52x (7,800 KB/s)

1:22:50 AM #44 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.

1:22:50 AM #45 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======

diggrd
2006-06-12, 11:10 PM
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession

I don't think you want these options, I would try Finalize CD : TRUE and no Multisession

starman714
2006-06-13, 12:36 AM
I know you're dealing with a DVD file here and my example is audio, but data is data and the same principle should apply, except for the fact that I had an option to decode the audio file:
I once had those same cyclic redundancy errors when I was copying .flacs from a DVD data disc back onto my hdd, and nothing would work....I copied every other file out of the folder except that one that just wouldn't go.
So I tried decoding right from the DVD drive with FlacFrontend but still no go...however, foobar2000 for some reason was able to do it.
So my point is to try copying this VTS_01_2.VOB, the one that won't go, onto your hd with any program that can copy data off of removable media, including plain old Windows, just to get that file onto your hd.
After you get them all onto your hd and into a VIDEO_TS folder, you can just burn it as data to a DVD disc with Nero or anything else that can burn data onto a DVD. If you're not re-authoring it, I don't see why you wouldn't just burn it that way to begin with. It seems to be much easier on my machine and it never messed up any of the DVD's I've burned that way.
If you have two DVD burners, try direct copying from disc to disc...anything that might get that file copied off of there

annajoy
2006-06-13, 03:56 AM
I finally got it to burn to an ISO Image useing blindwrite...bleh...this is so stupid...I had to do the illegal thing just to get the stupid thing to copy... :disbelief

jdawson
2006-06-13, 07:15 AM
glad you got it figured out.

schmoe75
2006-06-13, 09:07 AM
nero :finger:

Trader Dave
2006-06-13, 07:12 PM
CRC errors are usually the machine telling you that it is having problems trying to read or write the files!

yep but I also think it means it's a bad burn too.

usually there isn't anything you can do about those. try and find where you got it from to replace it.
I thought write and burn were the same thing. :hmm:

Nedstruzz
2006-06-17, 11:17 AM
Just downloaded my first DVD files (VTS_TS)

Files are showing as un-readable by my laptop. I have all the usual software for video playback, just not sure what I need to download so they will play or burn.

Any suggestions is much appreciated.

U2Lynne
2006-06-17, 11:51 AM
You need to have software specific for playing DVDs, not just playing video. VLC by videolan.org is a nice player.

hanshak2015
2006-06-17, 12:32 PM
And if you don't have access to VLC (no internet connection for example), the Windows media player will in most cases play VOB-files, if you're using Windows 2000 or higher. Only drawback could be that you have to start each VOB-file manually, as the player might not recognize the whole VIDEO_TS folder.

xequence
2006-06-17, 02:19 PM
In VLC go to File, then Open Directory and make it open the Video_TS folder.

Nedstruzz
2006-06-17, 02:24 PM
OK cool, got the VLC media player and the files now play. As far as burning to DVD do I drop the whole Video_TS file into sonic or the individual files?

Thanks for all your help!

Nedstruzz
2006-06-17, 03:01 PM
OK think I got it.

How many different types of files can be burned to a DVD disc?

hanshak2015
2006-06-17, 03:56 PM
Onto a Data-DVD: everything
Onto a Video-DVD: VOBs, IFOs and BUPs into the VIDEO_TS and AUDIO_TS folders. You can add other files into an EXTRAS_TS folder if you like, but then you can access these files with your PC only, standalones will not play them.

dannyandamie
2006-06-18, 10:05 AM
I just DL the phish Bluegrass dvd. My files pop up as "IFO" and "VTS" What do I need to do next??? The icons originally said "what program do you want to use open these?" so i chose to use bitorrent. but then the bittorrent keeps opening back up. also not sure what to do with compressing. please help???!!!!!

saltman
2006-06-18, 11:41 AM
you need a dvd player like powerdvd, or media player classic to play them on your computer. Butn the video_ts folder to DVD with ones, Nero, etc.. to weatch on your TV. read the FAQ

dannyandamie
2006-06-18, 05:46 PM
i'm still struggling with figuring out how to watch,burn, convert a dvd. THis is my first time to Trader's den and first time with DL a dvd. Do I need some conversion tool like FLAC, MKW like i use with audio files? All of the items under the DVD are listed as bittorrents. Do i need to change these to somehting else? Also do I need to DL "VLC?" ANy help is appreciated..
Thanks.

hanshak2015
2006-06-18, 06:44 PM
No, you don't need to convert anything. With Nero, select "Video-DVD" as type of project, then drag all files from the downloaded VIDEO_TS folder into the VIDEO_TS folder of your disk. Burn and watch.

On your PC you can play the DVD video files with either a DVD software player or Windows Media Player (in most cases). VLC is a superb prog, I'd suggest getting it. It plays DVDs as well as nearly every other video format around. And it's totally free.

Chuffer
2006-06-18, 08:08 PM
My burning software (ONES) will not recognize the TS folder as containing any DVD files? But they play fine on my computer. Any ideas?

hanshak2015
2006-06-18, 08:10 PM
What does your VIDEO_TS folder look like?

Chuffer
2006-06-18, 08:16 PM
Actually I lied. its not this show, but the set 2 from clifford ball that is giving me a problem. The VIDEO_TS folder looks normal to me. What would I be looking for?

dannyandamie
2006-06-18, 08:32 PM
i don't have nero anymore. any other types to use???
thanks/.

diskobean
2006-06-18, 08:40 PM
you can use dvd shrink, select 'open files' and burn w/ that, but i use dvd shrink coupled w/ nero to burn dvd's so....

TheMamba
2006-06-18, 09:44 PM
Try Ones:

http://www.videohelp.com/tools?tool=Prassi_ONES

hanshak2015
2006-06-19, 04:41 AM
You could tell me what files are inside, so that I can take a guess if the file structure is DVD compatible. Sometimes people produce DVDs without the VIDEO_TS files, which makes some burning progs fail to recognize it as a proper DVD.

Iknow
2006-06-19, 02:03 PM
I recently downloaded the Aerosmith Houston '77 dvd from this forum. The size on the thread said it was small enough for a dvd something like 4.25 Gigs. After downloading the files I went to burn the dvd with nero. After draging the video files onto nero the program unpacked the files and it is now to big for a dvd. I cannot even fit the show let alone the menues, slide show ect.

I have been running into this a lot. even small 500mb .wmv files are unpacking to be way to large for a single dvd. Sometimes Over 5 Gigs!!! What is going on here? Why can't I fit things onto dvd's? People say nero is thge best...almost everyone I know uses it.

How can I fit things onto dvd's when dvd burning programs make things so big

Any help would be appriciated!!!

hanshak2015
2006-06-19, 02:07 PM
You probably didn't chose DVD-Video as type of project. Try making sure that you got that, then just drag your downloaded VIDEO_TS into the one on your new disk.

And now let's wait for the people that tell you what a noob you are for posting that in the Lounge. :cool:

Iknow
2006-06-19, 02:15 PM
I am using dvd video. The VIDEO_TS file is only a 8kb file and will not drag onto nero. What is the VIDEO_TS file anyway?? I dragged all of the 5 larger video files (example: "VTS_01_2") onto nero and the size became to big. Nero makes it bigger...the video files downloaded say mpeg file. I think nero decodes the files and makes them bigger. How am I supposed to burn anything on this ite or anywhere else when nero makes almost everything too big for a dvd+r?

U2Lynne
2006-06-19, 02:21 PM
I'm moving this to Technobabble.

The Aerosmith Houston DVD is only 4.04 GB, so it will easily fit onto the DVD. You want to drag all of these files into the VIDEO_TS folder in Nero:

VIDEO_TS/VIDEO_TS.BUP
VIDEO_TS/VIDEO_TS.IFO
VIDEO_TS/VTS_01_0.BUP
VIDEO_TS/VTS_01_0.IFO
VIDEO_TS/VTS_01_0.VOB
VIDEO_TS/VTS_01_1.VOB
VIDEO_TS/VTS_01_2.VOB
VIDEO_TS/VTS_01_3.VOB
VIDEO_TS/VTS_01_4.VOB
VIDEO_TS/VTS_01_5.VOB

Nero should simply burn those - no conversion is necessary.

hanshak2015
2006-06-19, 02:38 PM
When you see Nero doing any checks or conversions, it's already the wrong path. Look for an option to manually browse and add files to the VIDEO_TS folder.

Iknow
2006-06-19, 02:51 PM
when I drag the files onto nero it reads (in red) under the project window "problems may occur when burning the project. Press the details button..." when pressed it reads "the following problems were detected in your project: your project requires more space than available on the selected destination device..."

The Aerosmith dvd files are in mpeg format. And there is some decoding and/or encoding that occurs while nero accepts the files. All of the files when highlighted on windows display a total size of 4.04G yet when I drag them over nero makes them 4.86G

Also the dvd menu that was included with the download does not become the menue. Nero still provides a generic menu awaiting design.

Nothing is going right here...help!!!...please!!!!

Iknow
2006-06-19, 02:57 PM
I just tried this: in nero>add video files>file browser>location>desktop>video_ts>highlighted all>open

nero places 5 video files onto the project window and says it's too big.

hanshak2015
2006-06-19, 02:59 PM
But when it puts the files into the project, does it check or convert anything?

Iknow
2006-06-19, 03:06 PM
It did last time. This time it only asked if I wanted to make seperste segment of merge them. when I put the mouse over each segment it says (in a yellow pop up balloon)
video mode: NTSC
aspect ratio: 4:3
Quality: standard play (5073 kbit/s)
resoloution:720x480 (ccir-601 d1)
sample format: progressive

video format:mpeg-2
audio format:lpcm
encoding mode: fast encoding (1 pass)

U2Lynne
2006-06-19, 03:07 PM
The Aerosmith dvd files are in mpeg format. And there is some decoding and/or encoding that occurs while nero accepts the files. All of the files when highlighted on windows display a total size of 4.04G yet when I drag them over nero makes them 4.86G
No, none of the Videos hosted on this site are just plain mpegs. They all download as a fully authored, ready-to-burn DVD in a VIDEO_TS folder. I checked that Aerosmith DVD out and posted the list of files in the torrent. IFO, BUP, and VOB files are ready-to-burn DVD files and there is absolutely no conversion that should be going on.

Iknow
2006-06-19, 03:13 PM
as far as the 5 larger files go, the icons originally in the torrents folder, now the video_ts folder on my desktop say the following: vts_01_0 mpeg file 143,004 kb vts_01_1 mpeg file 1,000,310 kb vts_01_2 mpeg file 1,000,304 kb

hanshak2015
2006-06-19, 03:13 PM
Nero does that when it expects an MPG or AVI file for conversion to DVD. What Nero version do you use? In the meantime you can try it the old fashioned way:

1. New Project - DVD Data
2. File format ISO1
3. Somewhere you'll see a checkbox "UDF compatibility". Check it.
4. In your new blank project, generate two folders: One named "VIDEO_TS", the other one named "AUDIO_TS"
5. Move your content into the VIDEO_TS folder, leaving AUDIO_TS empty.
6. Verify all is fine, then burn.

Bon apetit.

Iknow
2006-06-19, 03:16 PM
I see no BUP or VOB. I have two IFO files 2 backup IFO files. What are these files for anyway? They don't transfer onto nero. Only the 5 mpeg files show up.

hanshak2015
2006-06-19, 03:17 PM
as far as the 5 larger files go, the icons originally in the torrents folder, now the video_ts folder on my desktop say the following: vts_01_0 mpeg file 143,004 kb vts_01_1 mpeg file 1,000,310 kb vts_01_2 mpeg file 1,000,304 kb

Yeah, technically speaking they are MPG-files, and your Explorer will probably tell you so.

But the point is: All the files are just fine for burning. No need to alter anything. You just need to find a way to tell Nero to just burn them as they are.

hanshak2015
2006-06-19, 03:18 PM
I see no BUP or VOB. I have two IFO files 2 backup IFO files. What are these files for anyway? They don't transfer onto nero. Only the 5 mpeg files show up.

The dragging into the Nero window you describe is definitely the wrong way. IFO and BUP files contain navigation data and need to be on the disc like all the other files from the folder. Again: Which Nero version?

Iknow
2006-06-19, 03:26 PM
I am using nero 7. Even when the 6 files (including the menu) are added manually (in nero>add video files>file browser>location>desktop>video_ts>highlighted all>open) it's the same thing.

The Video_ts folder on my desktop shows 10 files 2 say "backup file for the IFO"
2 say "IFO file" and 6 say MPEG File

Iknow
2006-06-19, 03:28 PM
The only files that nero will load in the window are the mpeg files.

Iknow
2006-06-19, 03:30 PM
wait...is it possible that nero turned them into mpeg files??? I don't remember what the files said before I first loaded them onto nero. A window did pop up originally after each transfer saying that my mpeg-2 coding ability was going to expire next month. And there was coding going on with a progress bar!

hanshak2015
2006-06-19, 03:32 PM
So your window where the DVD files go, does it look like a list of titles with running time and other details, or does it look an Explorer window, i.e. with a folder structure?

Iknow
2006-06-19, 03:34 PM
are you refering to the window in nero?

hanshak2015
2006-06-19, 03:35 PM
Yes.

Iknow
2006-06-19, 03:36 PM
list of titles with running time and other details

hanshak2015
2006-06-19, 03:37 PM
It's the wrong window.

When you start up Nero, what were the options you chose to get to that window?

Iknow
2006-06-19, 03:38 PM
Nero smart start> favorites >Make your own dvd-video

Iknow
2006-06-19, 03:45 PM
the window you are refering to...is'nt that for a data-dvd? My home dvd player wont support those.

schmoe75
2006-06-19, 03:49 PM
Get off NERO, use the link in my sig & get ONES :wave:

hanshak2015
2006-06-19, 03:51 PM
Nero smart start> favorites >Make your own dvd-video

There we go. Start Smart keeps fooling me too from time to time. In the Start Smart window, look for an option called "Nero Express". There should be a drop-down menu on the left of the window with that option, sorted under Applications.

the window you are refering to...is'nt that for a data-dvd? My home dvd player wont support those.

True, a Data DVD would be tough for standalones. But you can burn a DVD Video with a window like that too.

Iknow
2006-06-19, 03:56 PM
trying that now...dvd is burning ...just a minute...

Iknow
2006-06-19, 04:06 PM
awesome! Thank you hanshak2915!

So if I use the "makeyour own dvd-video" option that I was before to design a dvd and click save it will make me a folder that I can burn like you just showed me using nero express?

hanshak2015
2006-06-19, 04:12 PM
Cool, glad I could help. The DVD seems to be surely worth it. I think if you use "make your own dvd" you can take an MPG or AVI and burn a DVD from it. To burn downloaded DVDs the Nero Express way is the better one.

Chuffer
2006-06-19, 07:48 PM
OK here lets see..... Looks like the usual cast of characters. VOB, DVD Movie Info, Back up file of the IFO

KingCustean
2006-06-20, 12:46 AM
I just downloaded the Ben Folds Five DVD from here, and it's telling me that it's 4.33GB. But, when I try to burn it using Nero, all of a sudden, it tells me that it's over 5GB, and will need 2 discs to burn. Is this common? And what can I do to fix it?

diggrd
2006-06-20, 01:27 AM
I just downloaded the Ben Folds Five DVD from here, and it's telling me that it's 4.33GB. But, when I try to burn it using Nero, all of a sudden, it tells me that it's over 5GB, and will need 2 discs to burn. Is this common? And what can I do to fix it?
How are you burning this in NERO? Do you have a real version or only the OEM version?

Do not use Smart Start!
Do not use Nero Vision Express!
Use Nero Burning Rom.
Search this forum for this same question! http://www.thetradersden.org/forums/showpost.php?p=349814&postcount=2

KingCustean
2006-06-20, 01:39 AM
Yeah, I'm using the OEM version. If Burning Rom isn't on that, then I have no way to fix this problem?

hanshak2015
2006-06-20, 03:38 AM
Have a look at this thread (http://www.thetradersden.org/forums/showthread.php?t=22893). If Nero is changing the size of the files, maybe you've got a similar problem.

schmoe75
2006-06-20, 07:44 AM
Use the link in my sig for ONES :thumbsup

sjoseph
2006-06-20, 09:26 AM
I get an error tryin' to burn this one as well ("reallocation" error)

KingCustean
2006-06-20, 03:26 PM
I think ONES is doing the job. Nero just wouldn't work, for whatever reason, even when I used Express.

Schmoe - how much is the registered version? And also, will the option "burn data disc to DVD" let me watch it on a DVD player? Thanks for the recommendation.

pigebear
2006-06-21, 07:50 AM
I had Troubles with some of the torrents when I used Nero.So I just got rid of it. Nero seems do do well with audio but sucks doing dvd

hanshak2015
2006-06-21, 12:56 PM
OK here lets see..... Looks like the usual cast of characters. VOB, DVD Movie Info, Back up file of the IFO

Could you be more specific... like posting a list of the filenames? :wave:

Chuffer
2006-06-21, 08:19 PM
Could you be more specific... like posting a list of the filenames? :wave:
Name Type

VIDEO_TS Backup file of the IFO
VIDEO_TS DVD Movie IFO
VIDEO_TS VOB File
VTS_01_0 Backup File of the IFO
VTS_01_0 DVD Movie Info
TVS_01_0 VOB File
VTS_01_1 VOB File
VTS_01_2 VOB File
VTS_01_3 VOB File
VTS_01_4 VOB File

Sorry about hijacking this thread :cool: I really need to figure out why this folder will not burn.

diggrd
2006-06-21, 10:08 PM
do you have ifoedit?
http://www.ifoedit.com/
check out the interactive screen shot for more info on what it can do. I always like to use Get VTS sectors and process all IFO files before burning DVDRs

Festafarian
2006-06-24, 05:41 PM
If there is a thread for this, sorry, I couldn't find it.

Lately I seem to be having a problem with dvds I burn for people that will not play in their player. Recently I did a big trade in Japan. Some of the dvds would not play in any of his players, but looked fine on his laptop, so he was able to reburn them. But... sometimes I make dvds for friends who don't have a computer. No, they are not either Pal or data discs

My player will play just about anything, so even if I check 1st, I can't tell if it will work for others

I have a PC with XP, I use TY disks, and I use nero. Anybody know what might be wrong? Or possibly the best way to insure compatibility?
Thanks

Explosivo
2006-06-24, 07:32 PM
When it comes to standalone players, compatibility can be a crap shoot. I have 4 DVD players in my house (3 of them similar model Sony's) and discs often work on 1 or 2 but not the others. Ive also received numerous trades where some of the discs played fine but others weren't even recognized except on my PC. So far my Philips has played every disc Ive thrown at it.

From what Ive read it seems to depend on the players. Some prefer + or -, while others prefer certain brands. Having a newer player seems to help. Some people have said that slower burns help, but Im not to sure about that. Burning high rated media too slow can make worse burns.

Festafarian
2006-06-24, 08:13 PM
Well at least I'm not alone :lol When I'm trading, it's not usually a problem because they have a computer and can figure it out. The problems always occur when I'm burning something for friends who only have one player

Sacredroots
2006-06-24, 10:09 PM
Nope...not alone...I have had similar problems.

schmoe75
2006-06-24, 11:30 PM
ONES (http://www.softpedia.com/get/CD-DVD-Tools/Data-CD-DVD-Burning/ONES.shtml) :wave:

thisistoto
2006-06-25, 05:36 AM
Standalone players are always fussy about playing burnt discs.

Burning at slower speeds does seem to improve compatability a bit, and using higher quality media.

As far as dvd player brands, my cyberhome (30 bucks from walmart) will play anything, discs that my high end sony wont even play.

blackfish
2006-07-03, 04:20 PM
I am ripping DVD's with DVD Decrypter.

Am I loosing any of the main source in any way doing this? Am I re-compressing the data? Loosing bits?

Is there a tool for exact Video copy such as EAC for audio?

Thanks in advance.

Five
2006-07-03, 08:44 PM
all the dvds here do not have copy protection thus it is not necessary to use dvd decrypter.

just drag and drop the VIDEO_TS folder to your computer, generate md5 checksums from the dvd you just copies from, then save these checksums to your computer and test them against what was copied to your hd. then if you want to burn another dvd from the verified files on your computer, burn it then generate checksums from that new disc and then run them against the files on your hd. so long as they keep matching up the extraction and copy are exact. it is a little different than audio cdr in this way.

Bron Yr Aur
2006-07-07, 11:14 PM
Ok, I'm having some problems burning certain DVD's, and I'm looking for some advice on how to solve my problems.

I've downloaded http://www.thetradersden.org/forums/showthread.php?t=16571 this torrent, and when I am playing it in PowerDVD the show is in a normal 16:9 full screen aspect ratio and the video is skewed (as in, everything is too skinny). So, I burned the first disc onto a Sony DVD+R with ONES as "record data files to CD or DVD." I created an empty "AUDIO_TS" folder and dragged the VIDEO_TS and AUDIO_TS into the contents area, and burned. However, I've got a couple of problems. Number one, I'm wondering if I burn discs this way if they will play on most older DVD players (I know they do in fact play on my new standalone player). Number two, when I burned the disc and popped it into my player, the picture was full screen (when I assume it should be widescreen). The video isn't skewed, but it is chopped off on the sides.

Now, I was also trying to burn this show: http://www.thetradersden.org/forums/showthread.php?t=21467 I did everything the same way as before, the first disc burned perfectly, but when I burned the second, it wouldn't play in my standalone player, because only the VOB files were burned. They now show up in the VIDEO_TS folder on my harddrive, but didn't burn to disc.

Anyone have any suggestions? Thanks in advance.

joemc
2006-07-08, 07:38 AM
hi, i sometimes use a reauthoring or converting program even when i have dloaded a full dvd. you can then set what you want the output files to be, ie pal, 16.9 etc. then burn the output file. i never have a loss of quality. you could use win avi or shrink among many.


joe

schmoe75
2006-07-08, 09:58 AM
So, I burned the first disc onto a Sony DVD+R with ONES as "record data files to CD or DVD." .

Anyone have any suggestions? Thanks in advance.
If u want to burn a dvd with ONES, u should be using "Record VIDEO_TS"...NOT 'record data files'. I've never had an issue with it. :thumbsup

Also, when 'creating the project' to burn, u should be using the "browse folder icon" on the right side of the window (w/ the green arrow) and NOT the one on the left.

Bron Yr Aur
2006-07-08, 03:41 PM
Ok, I'll try that schmoe, thanks for the advice.

However, now when I try to open the Set Two files from the UM 2002-05-17 DVD, it says there are no DVD video files to burn, when I select that folder as the VIDEO_TS folder. However, the individual files do play in PowerDVD. Also, when I try to check the Set Two .md5's, the mkw opens, then closes immediately. I have been having some issues with this computer lately, which is why I'm trying to burn so much off in the first place, but I'm thinking this could possibly be part of the problem.

wolf_in
2006-07-12, 04:29 AM
every time i burn a duel layer disk it does not play in my dvd player. i have a DL. burner and all that jive but every time i end up having to shrink it to 2 disks to play it on my player if any one could help me out our maybe tell me what i might be doing wrong i would be very grateful. btw i have a g.e dvd player that plays just about any other disks but DL. :wtf: :wtf: :wtf: :hmm: :hmm:

schmoe75
2006-07-12, 08:31 AM
That's it...like most other technology, things havnt completely caught up to date. there are some dvd players that are not equipped to play DL blanks.
Have you tried playing the discs in your computer after burning them to make sure it is the player and not the discs?

(217.18 GB/49.46 GB/0.23)....talk about a horrendous ratio :disbelief

Homebrew101
2006-07-24, 07:44 PM
I live in the USA, my standalone DVD player is region 1. My Lite-On DVD burner in my pc is set for region 1.
I just burned a dvd that my standalone player (Sony) will not play citing that it is "prohibited by area limitations" which I assume to be referring to the region code. I burned the dvd with Nero Express. It plays fine on my pc with PowerDVD.

I have since burned Hendrix at the Atlanta Pop Festival and that plays fine on the Sony.

What went wrong? Nero? The original files? I want to burn it again but not for another 30 cent coaster.

gsmyth79
2006-07-24, 07:50 PM
What DVD did you try burning? And had anyone else in the thread had similar problems?

Homebrew101
2006-07-24, 07:55 PM
What DVD did you try burning? And had anyone else in the thread had similar problems?

It was ELO Live in London 1976 - I got off of Zomb. It's been snatched over 50 times with no problems as far as I know.
Is there anyway I can read the dvd I burned on my pc to see what region it is showing?

gsmyth79
2006-07-24, 07:58 PM
I'm sure there is but I don't use PCs so I would try videohelp.com. That place is great.

Karst
2006-07-25, 05:45 AM
I think there are lists online that give you codes that let you set your player to region 0. A friend brough the Led Zep live boxset once from the US and we got the code and it played fine. That said my DVD player was quite cheap and Sony are known for being awkward with this.

worm
2006-07-25, 01:39 PM
I know this has probably been brought up 1000 times but... I have a dual layer burner so I figured I could just drop dvd9 files into nero like dvd5's, then put in the extremely expensive dual layer disk and bling it up but I guess not. They burned to completion just fine so I figured it worked but they will not play. What special things do I need to do. I have wasted over 20 gigs of downloaded shit that I had to delete for space and 25$ on blanks. I got one blank left and want to get it right PLease help

jackbutler
2006-07-25, 02:41 PM
Will they not play in the PC or a standalone DVD player? Some standalones won't play burned DL. As far as Nero goes it should have worked just fine if it completed the burn with no errors depending on how you burned it (for example dont burn VOBs as data it needs to be burned as DVD Video).

Explosivo
2006-07-26, 04:07 AM
You said the show was in London, so am I correct in assuming its PAL? Regardless of the region settings, if you have a US Sony DVD player that will be the message you receive with a pal disc. There is a header trick you can use, where you change the ifo files to say NTSC and that should make the disc playable (Sony's can convert PAL -> NTSC on the fly but this ability is turned off). I dont remeber the details of it, but its not very difficult. Do a search for ifo edit header trick and you should find directions.

AAR.oner
2006-07-26, 07:26 AM
here's the trick for PAL > NTSC, or vice versa

http://www.thetradersden.org/forums/showpost.php?p=284920&postcount=5

sjoseph
2006-07-26, 11:11 AM
Gotta VENT: I've been burning DL-ed audio shows for years now and have ventured into video just recently, but I gotta tell ya I haven't had much success at all. Of the twenty or so shows I've downloaded (days on end, as you all know), only a handful have actually burned correctly. I use Nero (DVD vid , not data) have Windows XP, and have read all the forums for directions and help, but still get the following:
reallocation error when attempting to burn or it burns without error, but when playing in my standalone (which accepts dl-ed shows cuz I've played others), it either skips, pauses and freezes, or it says this is an "incorrect disc." The latter seems to be the problem currently (the Miles Davis part one, the John Butler Trio from Woodford for example)

What the heck??
"George is gettin' angry"

pawel
2006-07-26, 01:19 PM
Check a bad disc quality with http://www.cdspeed2000.com and post here a screenshot. Test speed should be set to 8x, regardless what you use for burning.

bburnett
2006-07-26, 01:24 PM
Gotta VENT: I've been burning DL-ed audio shows for years now and have ventured into video just recently, but I gotta tell ya I haven't had much success at all. Of the twenty or so shows I've downloaded (days on end, as you all know), only a handful have actually burned correctly. I use Nero (DVD vid , not data) have Windows XP, and have read all the forums for directions and help, but still get the following:
reallocation error when attempting to burn or it burns without error, but when playing in my standalone (which accepts dl-ed shows cuz I've played others), it either skips, pauses and freezes, or it says this is an "incorrect disc." The latter seems to be the problem currently (the Miles Davis part one, the John Butler Trio from Woodford for example)

What the heck??
"George is gettin' angry"

Is your stand alone player older than 3 years? That's most likely your problem.
Older players freeze on the switch from layer 1 to layer 2.
The more data you have, the more likely you are going to have problems, its just the nature of DL.

sjoseph
2006-07-26, 02:45 PM
thanx for the help so far...why the "incorrect disc" error on my standalone? I get it for both single and dual layer...

Homebrew101
2006-07-26, 04:02 PM
Are you using good quality DVD blanks or the cheap store brand types? Check out www.digitalfaq.com/media/dvdmedia.htm for recommendations on choosing your dvd blanks.

I also recently started downloading dvd's and also use Nero for burning and I haven't had a coaster yet using Maxell and Sony dvd+r media.
This week, Office Depot's here have Sony 50 packs for $15. Watch for sales and the good shit is about the same price as the crappy dvd's. Less than a month ago Office Depot had the Maxell 100 packs for $28.

Homebrew101
2006-07-26, 04:08 PM
You said the show was in London, so am I correct in assuming its PAL? Regardless of the region settings, if you have a US Sony DVD player that will be the message you receive with a pal disc. There is a header trick you can use, where you change the ifo files to say NTSC and that should make the disc playable (Sony's can convert PAL -> NTSC on the fly but this ability is turned off). I dont remeber the details of it, but its not very difficult. Do a search for ifo edit header trick and you should find directions.

The latest version of IFOEdit states that it doesn't work well with WinXP. Are there any other programs to edit the IFO files that might work with XP?

The uploader at Zomb said it was NTSC with a frame rate of 29.970 but some one else has confirmed that it was PAL.
Thanks.

calikila
2006-07-26, 06:39 PM
ive been burning all kinds of video dvds for yrs now and jus recently ive had problems with skipping. im using what is said to be high quality discs
TDK003
yet its still skipping. it isnt just concert video that skips lots of things do.
i use dvd shrink or dvd decrypter to burn video.

anyone know what the problem could be?

gsmyth79
2006-07-26, 06:55 PM
You can also buy an Apex DVD player for 30 bucks that will play everything (NTSC and PAL, etc). That wat you'll never have to worry about doing the IFOedit thing.

Festafarian
2006-07-26, 11:51 PM
There are menu hacks for most dvd players, try googling it.
Also, you asked about how to see if a dvd is Pal or NTSC, if you have nero, use the disc info tool, it'll tell you everything

Homebrew101
2006-07-27, 08:27 AM
Thanks to everyone, InfoEdit worked like a charm. I don't know if it affected the playback quality or not but it plays and was certainly a simple fix.

My entertainment center is too full to add a $30 Apex what with 2 amps, pre-amp, vcr, dvd surround sound processor, tuner, cd player, tv, center channel speaker and an audio switching box (lack of inputs on tube pre-amp).

AAR.oner
2006-07-27, 06:59 PM
Thanks to everyone, InfoEdit worked like a charm. I don't know if it affected the playback quality or not but it plays and was certainly a simple fix.

My entertainment center is too full to add a $30 Apex what with 2 amps, pre-amp, vcr, dvd surround sound processor, tuner, cd player, tv, center channel speaker and an audio switching box (lack of inputs on tube pre-amp).
glad that worked...the quality shouldn't have changed, as nothing was actually converted...i would still archive the orig files for trading, and use the IFOEdit-copy as yer "watchable copy"

jnevi9nr
2006-07-27, 08:04 PM
I downloaded the show via Bit Torrent, now what do I do with the files to be able to watch them? First time DVD downloaded. Usually, with audio, I would go to xACT and convert to a wav and then play them in iTunes. I have an iBook. Any guidance would be great! Thanks.

gsmyth79
2006-07-27, 08:17 PM
I suggest using Toast, it's not free but is the best DVD burning software around for Mac. You can find it "discounted" if you look hard enough.

jnevi9nr
2006-07-27, 08:36 PM
any suggested places to look? I just want to convert these files so I can watch the video.

AAR.oner
2006-07-27, 09:10 PM
if you just wanna watch em on yer comp, you can use VLC http://www.videolan.org/

E_rock
2006-07-27, 09:10 PM
any suggested places to look? I just want to convert these files so I can watch the video.

Torrentspy.com. You can watch on your comp by drag&dropping the VIDEO TS folder to your favorite player, Nero, WinDVD, You can also go for freeware, VLC plays almost everything. Hope this helps.

CDR Live
2006-07-28, 02:44 PM
Hi
Just completed my first video torrent download and found that the .vob files have appeared on my PC as Nero showtime format!!. How can I change them to .vob or whatever they need to be in so I can burn them to DVD. Also can someone recommend a good download burning program.Thanks

Virgil Caine
2006-07-28, 03:29 PM
Background:

I have a Sony DVD player which states that it handles 5.1 and DTS.

I have a Sony Receiver that handles 7.1 and DTS

I have bought a few things that have enhanced audio: (Pulse DVD, Humble Pie - Live At The Whiskey DVD Audio, Yes - Fragile DVD Audio, etc.) I can listen to them in all their infinite glory. I can also listen to SACDs and the enhanced audio on the Dual Discs.

However....when I try and download a 5.1 DTS (like the toup beatles series or some of the Floyd stuff) All I get is the "white noise" from my player. I also get the same result with any 24bit show that I try and listen to as well.


I am using the latest Nero suite to burn. I have tried to burn several different ways. I even followed a tutorial of "burning image to disc". I still get the same results of white noise in my home audio equipment.

What am I doing wrong?
Do I need better software? or Upgrade audio equipment?

Any suggestions would be greatly appreciated.

saltman
2006-07-28, 03:38 PM
Hi
Just completed my first video torrent download and found that the .vob files have appeared on my PC as Nero showtime format!!. How can I change them to .vob or whatever they need to be in so I can burn them to DVD. Also can someone recommend a good download burning program.Thanksthat's becuase you have the file associations setup so that .vob is associated with Showtime. You should be able to burn with Nero express without changing your associations. You should have the .vob file associated to your DVD viewer... like PowerDVD or whatever you use. To change associations.... when in My Computer. Tools > Folder Options > Opens with ... browse to your viewer.

AAR.oner
2006-07-28, 05:05 PM
yer player &/or receivere may not be able to process 24-bit audio, which would explain the white noise when trying to play back 24-bit shows...as for the DTS problem, i'm not sure...it could be a problem with one of the components, have you tried playing a store-bought DVD with DTS? does the white noise occur as well, or just with home-authored shows?

also could be an issue w/ Nero :hmm: you should check out the program ONES--much better burning software!

CDR Live
2006-07-28, 06:22 PM
Thanks for the quick response. I'll give it a try. :wave:

Explosivo
2006-07-28, 10:34 PM
The conversion is being done by the player, so how good it looks is based on how well the players converter performs, but most of them are fine for ROIO's. What I used to do to keep a tradeable copy is just backup the original ifo files and burn them onto the disc along with the altered ones (name them something like *.ifoORIG) and just switch back to those when burning a copy for a trade.

mattrob487
2006-07-29, 03:11 PM
I use Nero too, and I can't figure it out, either. I think it has to do with the two layers. Do I just burn the two folders on the disc or do I have to insert the audio/video parts somewhere? What is the video_ts mean (or whatever the folders say)?? I hve like ten shows waiting to be burned, but can't figure it out and it's taking up my hd space... thanks for any help.

Maybe if someone could do a walk through on how to burn a disc, that would be helpful. There's no instructions on how to take a d/led show and burn it. :hmm:

jdjosh18
2006-07-29, 03:30 PM
I had the same problem with Nero, try using Ones. After my ones expired my nero magically started working. Also I do all my burning after a restart and don't open any other programs except for Nero. And like people say on here use the Nero ROM not the express or anything. Hope I could help.

diggrd
2006-07-29, 05:32 PM
I alway use IfoEdit (http://www.ifoedit.com/index.html) to double check before I burn. Just open the VIDEO_TS.IFO and hit get VTS sectors

http://img.photobucket.com/albums/v286/diggrd/ifo.jpg

for instructions on burning with Nero look here and many other threads in this forum
http://www.thetradersden.org/forums/showpost.php?p=298815&postcount=8

ddt4428
2006-07-31, 05:27 PM
I just got into downloading dvd files after years of downloading audio files. Now, while it is still new ground for me, I feel that I have progressed in a relatively decent manor; until today. I just picked up a 25 pack of sony dvd-r so i can watch concerts on my home player. Before I used the discs that were given to me when i got my drive from the store. They weren't bad, just that I could only use them on certain players. So, after pickin up the new blanks, I wanted to be able to burn the dmb2005-08-21 gorge concert that I had downloaded a while ago. So I place the disk in, message window pops up, close that, start nero (oem version), load all of the files into the video-ts folder. Once the program started, it went through all of the cache-ing that it goes through, and then and error message popped up saying that it was an illegal disk. At first I thought to myself that maybe the disks were labled wrong, checked it, sure enough - dvd-r. So I tried it again, same thing. And just to make sure that I wasn't going crazy or seeing things, I checked the drive info through nero, and noticed that my drive handled these types of disks. So... after reading so related topics on here, I decided to give ones a try (simple user interface, its great). So, I put the disk in, try burning, crapped out again, ran two tests through Ones, both crapped out. Even testing on 1x, it failed. As far as I know, its not the burner itself, because it worked fine earlier when I burned oar2005-11-19 from RPI field house.

Any help would be greatly appreciated, I really want to get this off of my hd, so I can watch it, and have more space to download more.

TheMamba
2006-07-31, 08:37 PM
Doing a quick google search netted these:

http://www.google.com/search?q=nero++illegal+disk&sourceid=mozilla-search&start=0&start=0&ie=utf-8&oe=utf-8&client=firefox-a&rls=org.mozilla:en-US:official

1. Make sure the firmware (drivers) for your DVD drive is updated. I didn't see you note what drive you're using but just go to the manufacturer's website and they should have it there.

2. Make sure Nero is all up to date.

3. Could be shitty media. I've never used Sony so I can't comment on them overall, although you could have gotten a bad batch. Try #'s 1 and 2 first and let us know how it goes.

ddt4428
2006-08-01, 03:05 PM
hey, here is my info log from nero info tool... I downloaded the firmware update, but I noticed that it was an update for firmware version bs0y, and I have bs0c. heres my my log:
Nero InfoTool 3.07
Drive Information
------------------
Drive : LITE-ON DVDRW SOHW-1633S
Type : DVDR/RW DL Recorder
Firmware Version : BS0C
Buffer Size : 2 MB
Date : 2004-08-27
Serial Number
Vendor Specific : 2004/08/27 17:53
Drive Letter : E:\
Location : 1:0
Mechanism : Tray
Read Speed : 48 X
Write Speed : 48 X
Read CD Text : Yes
Return C2 Pointers : Yes
Read CD-R : Yes
Read CD-RW : Yes
Read DVD-ROM : Yes
Read DVD-RAM : No
Read DVD-R : Yes
Read DVD-RW : Yes
Read DVD-R DL : No
Read DVD+R : Yes
Read DVD+RW : Yes
Read DVD+R DL : Yes
Read BD-ROM : No
Read BD-R : No
Read BD-RE : No
Read HD DVD-ROM : No
Read HD DVD-R : No
Read HD DVD-RW : No
Read HD-BURN : No
Read Digital Audio : Yes
Read CD+G : Yes
Read VideoCD : Yes
Write CD-R : Yes
Write CD-RW : Yes
Write DVD-R : Yes
Write DVD-RW : Yes
Write DVD-R DL : No
Write DVD+R : Yes
Write DVD+RW : Yes
Write DVD+R DL : Yes
Write DVD-RAM : No
Write BD-R : No
Write BD-RE : No
Write HD DVD-R : No
Write HD DVD-RW : No
Write HD-BURN-R : No
Write HD-BURN-RW : No
Buffer Underrun Protection : Yes
Mount Rainier : No
SolidBurn : No
Modes : Packet, TAO, DAO, SAO, RAW SAO, RAW DAO, RAW SAO 16, RAW SAO 96, RAW DAO 16, RAW DAO 96
Region Protection Control : RPC II
Region : 1
Changes User : 4
Changes Vendor : 4
Disc Information (E:\)
-------------------
Type : - no disc inserted -

Drive Information
------------------
Drive : Lite-On LTN486 48x Max
Type : CD-ROM Drive
Firmware Version : YD01
Buffer Size : 120 KB
Date : ?
Serial Number
Vendor Specific : 
Drive Letter : D:\
Location : 1:1
Mechanism : Tray
Read Speed : 48 X
Write Speed : n/a
Read CD Text : Yes
Return C2 Pointers : No
Read CD-R : Yes
Read CD-RW : Yes
Read DVD-ROM : No
Read DVD-RAM : No
Read DVD-R : No
Read DVD-RW : No
Read DVD-R DL : No
Read DVD+R : No
Read DVD+RW : No
Read DVD+R DL : No
Read BD-ROM : No
Read BD-R : No
Read BD-RE : No
Read HD DVD-ROM : No
Read HD DVD-R : No
Read HD DVD-RW : No
Read HD-BURN : No
Read Digital Audio : Yes
Read CD+G : No
Read VideoCD : Yes
Write CD-R : No
Write CD-RW : No
Write DVD-R : No
Write DVD-RW : No
Write DVD-R DL : No
Write DVD+R : No
Write DVD+RW : No
Write DVD+R DL : No
Write DVD-RAM : No
Write BD-R : No
Write BD-RE : No
Write HD DVD-R : No
Write HD DVD-RW : No
Write HD-BURN-R : No
Write HD-BURN-RW : No
Buffer Underrun Protection : No
Mount Rainier : No
SolidBurn : No
Modes : n/a

Homebrew101
2006-08-01, 04:58 PM
Shouldn't be the Sony's. I have a Lite-On dvd burner and it loves Sony's :) even more than the Maxell's I also have used. Sony's are amony the top-rated dvd blanks.

I can't tell you what you're problem is. Dumb question but it's probably something I would do - did you accidentally put the dvd blank in the Lite-On LTN486?

ddt4428
2006-08-01, 06:52 PM
nah... when i place the disc inside of my burner, the little window pops up asking what you would like to do (burn audio, use nero, etc.) so atleast I know its recognizng the disk as blank media

ddt4428
2006-08-01, 10:04 PM
homebrew & mamba, thank you both for your help... I updated the firmware for my drive, and then just finish burning a dvd without any problems.

Much thanks goes out to both and the entire tdd.org staff

TheMamba
2006-08-02, 07:26 AM
Cool, glad it's working! :clap:

joeverri
2006-08-03, 03:46 AM
just downloaded a grateful dead bittorrent dvd 8-27-72 can't figure out how to view the video - any help would soooo be appreciated!?! don't know which program to use to see the vob files?

hanshak2015
2006-08-03, 03:47 AM
Try "Video Lan Client" also known as VLC. It's free and powerful.

joeverri
2006-08-03, 03:49 AM
sweet - i'll try it right now - thanks much

joeverri
2006-08-03, 03:57 AM
thank you brother the juice was worth the squeeze!!!!

hanshak2015
2006-08-03, 04:03 AM
Glad you like it. Excellent prog. Cheers.

ElectricPeak74
2006-08-05, 12:52 PM
Ok so I dload a video from a torrent and it has a menu.

How do I use the menu in Nero 7?

This is driving me crazy! I have never burned a dvd so I am trying to figure this out.. For some reason when I want to make my own video it keeps taking me a menu edit screen (like if wants to make a generic menu).

How do I insert the menu that comes with the dloaded video? I have been looking at all the options and I don't get it.

Video_TS where do I put it to make it all work?

saltman
2006-08-05, 01:38 PM
you are using the wrong program. You need to use Nero xpress, not vision express. and everything will make sense. You don't need to make your own menus. They are already contained in the video_ts folder. Just choose dvd video and drag the video_ts you downloaded onto the video_ts folder and click burn.

AAR.oner
2006-08-05, 01:49 PM
like Saltman said, use Nero xpress or Nero Burning ROM...the program yer using is trying to author a DVD, not burn one that's already authored, and you definitely DON'T want to reauthor it

bigandtall
2006-08-05, 03:29 PM
Hey,

I'm just getting into burning DVD's. I just finished downloading the Phish Miami DVD. The download is split into two folders: set 1 and set 2. Each folder has its own VIDEO_TS files in it. How do I work with this in Toast to burn 1 DVD? I've been searching around here without any luck.

JR

leatherman
2006-08-05, 03:37 PM
I would think you would have to burn that to 2 discs. A dvd can only have one video_ts folder.

ffooky
2006-08-05, 04:15 PM
Looking at that torrent, it's definitely two separate discs.

billysera
2006-08-10, 07:05 PM
Hello,
I've posted on another thread about this and got no help. I sucessfully dled the torrent but I can't burn it with toast titanium in dvd mode. I can when I change the menu to data dvd/clicked dvd rom but I can't watch it. I've tried on multiple dvd players and my mac and it won't play. I already searched the tread about this show to no avail. It's weird, the encoding starts and 3/4th of the way through it aborts. Never happens on anything else from this site. Couple questions for you kind folks
-what software do I need to simply watch the dvd on my mac, do I just drag the video ts file into said program?
and
-is there another freeware dvd burning program that I might have better luck with?

Thanks for the input in advance, it's driving me crazy that I can't watch this "holy grail" of phish dvds. :hmm:

nfolly
2006-08-10, 07:46 PM
I am attempting to burn a show using DVD Lab Pro using the same process I have many times before. But this time I get an error message that reads "Addresses in VMG IFO does not match the actual file sizes. Abort" Does anyone know how to correct this error. P.S. the torrent was Scofield, Cobham, Duke, Johnson 1976-07-06 Montreux (NTSC). Any advice would be apprciated.

TheMamba
2006-08-10, 08:15 PM
I believe that VLC works on Macs: http://www.videolan.org/

TheMamba
2006-08-10, 08:19 PM
A search on Google turned up this:

http://www.mmbforums.com/phpbb/viewtopic.php?t=11709&postdays=0&postorder=asc&start=0&sid=24a23f400a8faeaddb4dab2e7e415498

:hmm:

AAR.oner
2006-08-10, 08:32 PM
VLC to watch...as far as the burning issuess, have you tried posting about it in the show's thread? are you sure the torrent finished d/ling completely?

i'll try to burn a copy and see if it does the same

billysera
2006-08-10, 08:39 PM
thanks so much mamba. :lol: Now if I could only figure out how to burn the damn thing.

billysera
2006-08-10, 08:46 PM
yeah, already posted in that thread. someone else said it happened to them too. I CAN burn it, but only in data dvd mode (won't play in dvd player in home theater). Won't burn for me in video mode in toast titanium

AAR.oner
2006-08-10, 08:54 PM
strange...mine burned fine in Video mode :hmm:

try burning in data mode "DVD-ROM (UDF)" [not Mac Only or Mac & Pc]...make sure to add the VIDEO_TS folder and an AUDIO_TS folder [leave empty]...alot of standalone DVD players will play a disc burned like this, its worth a try

billysera
2006-08-10, 09:55 PM
how do you add an audio ts folder empty? Do you just hit the "add folder" icon and leave it empty?
thanks by the way aar.oner

TheMamba
2006-08-10, 10:03 PM
Yeah, leave it empty.

U2Lynne
2006-08-10, 10:10 PM
Here are some instructions on how to burn it *not* in Video DVD mode in Toast and have it work on DVD players (I only burn using this method because I like to add the md5s, text file, and covers onto the DVD for storing purposes).

http://u2lynne.sandsmuseum.com/burning.html#anchor9

billysera
2006-08-10, 11:42 PM
thanks so much lynne. I was doing everything right before except hitting the "new disc" button. I guess that was causing the source error code. Works great now in my theater dvd player :clap:

U2Lynne
2006-08-11, 01:19 AM
thanks so much lynne. I was doing everything right before except hitting the "new disc" button. I guess that was causing the source error code. Works great now in my theater dvd player :clap:
That step is always the one that kills people.

Glad you got it to play. :)

King Kong
2006-08-11, 01:31 AM
Thanks guys!
Had installed Nero 7 a coupla weeks ago and was having the same problem. After reading ya'lls replies went poking around and found what was needed, it sure wasn't obvious.
Finally, get to experience all these wonderful shows the way the authors intended.

eatme
2006-08-13, 06:40 PM
So I am very new to all of this stuff...

Question #1:
I have a pretty big AVI/MPG/MKV collection of stuff...

This is what I want to do: I would like to make a DVD where each video file is its own chapter.

There has to be some simple DVD burning software where I can just drop a bunch of AVI files in, and it burns me a disk...

:hmm:

Help?

Question #2:
Uhhh.. I am downloading a video... The whole thing is in a VIDEO_TS directory and there are a bunch of files with extentions .VOB, .IFO, etc... So what do I do know? How can I make a DVD out of this.

Lovingly confused,
-- Your old and crusty analog fan..

U2Lynne
2006-08-14, 12:08 AM
Q1: videohelp.com

Q2: search the site for the software you use to copy videos. We have several threads about how to burn DVDs using different software.

Iknow
2006-08-17, 11:41 PM
When burning dual layer dvd's I found that copytodvd was the only program that worked. If the dvd does not play. Try shuting off the player and restarting. I have burned dvd's that my player would'nt play and then later...it played them. weird...

schmoe75
2006-08-18, 08:09 AM
Nero is a PoS program...try the link in my sig for burning. if it still doesnt work, then you've got a combination of either low budget discs or a bad player.

almost 600 peeps have dl'd MD Part 1 with no problem.

Sugarkane
2006-08-23, 03:16 AM
I've just got the 2nd DVD torrented that Toast refuses to burn for me cuz it says it's encrypted but i know it's not. any ideas?

ohkeepa
2006-08-23, 03:22 AM
have you ever used Mac the Ripper?

Sugarkane
2006-08-23, 03:38 AM
no, but i just downloaded and i can't figure out how to burn a DVD from a video-ts folder on my HD.

reece
2006-08-23, 04:24 AM
This is what it looks like for me. Then I just drag the VIDEO_TS folder or click "select" and browse for the folder. Then burn. I haven't had any messages about encryption.

ffooky
2006-08-23, 06:00 AM
Have you tried making an image with DVD Imager (http://lonestar.utsa.edu/llee/applescript/dvdimager.html), mounting that and then ripping with MTR ? I don't know if it will work but it might be worth a go.

Sugarkane
2006-08-23, 02:50 PM
This is what it looks like for me. Then I just drag the VIDEO_TS folder or click "select" and browse for the folder. Then burn. I haven't had any messages about encryption.

Yeah, I mean I use Toast all the time. It's only one or two things I've downloaded where it says that message.

U2Lynne
2006-08-23, 03:00 PM
Have you tried burning it using Data > DVD-ROM (UDF)? Maybe trying it that way would not cause that message to appear.
http://u2lynne.sandsmuseum.com/images/toast.gif
Directions (http://u2lynne.sandsmuseum.com/burning.html#anchor9)

manmachine
2006-08-29, 04:07 AM
Everything has been ok until the last week or so.

I have downloaded the U2 12/06/2006 show and i have burned the disc using Toast vesion 6.1.1 using DVD Video-from Video_TS tab and altough the picture is fine there is no sound. The disc seems to have the correct files in the folder and verification was Ok.

I am playing the shows on my Mac.

I have had the same problem on 4 other shows although 1 show has burned correctly with sound.

Many thanks in advance for your help.

bullpinjohn
2006-08-29, 08:16 PM
I downloaded a dvd, I want to burn a dvd so that I can
watch it on on my dvd player. Do I exclude checksums and
info. text? Thanks

U2Lynne
2006-08-29, 08:46 PM
I throw checksums and info and any covers that came with the torrent into an "EXTRAS_TS" folder.

bullpinjohn
2006-08-29, 10:40 PM
Thank you!

schmoe75
2006-08-30, 07:22 PM
If you're on a PC, the software u should be using to burn with is linked in my sig... :thumbsup

terrapinstranger
2006-08-31, 03:56 PM
I have been downloading videos and want to burn what I have downloaded. I can watch them on my laptop but I want to burn to DVD and be able to play in my stand alone player. Looks like all the files I have thus far are .vob coupled with .bup, .ts files. What do I do now? Are there free converters? A nice step by step guide would be helpful. Thanks in advance.
Peace

saltman
2006-08-31, 04:04 PM
no conversion is necessary. These are ready to be burned with your favorite DVD burner program such as Nero xpress or Prassi ONES, etc.

terrapinstranger
2006-08-31, 04:15 PM
Just drag and drop?
I kept getting a message saying that I could not do it. Can I keep everything in one folder and drop the file into nero or record now or do I need to separate each file? Furtermore, when I am making the disk what do I select as the type of disk I am making? Again thanks!

terrapinstranger
2006-08-31, 04:16 PM
BTW, nice mantra.

saltman
2006-08-31, 04:22 PM
I think there is a tutorial for Nero somewhere on here. You need to use Nero Express... not Nero, Not Record now, Not Vision Express, etc..... You should be able to open just Nero Express. Then you click make DVD video. click add. browse to dvd that you are trying to burn. Then drag the entire video_ts folder on top of the video_ts folder on the left. Then click burn. It will be easy after you've done it once. Ignore and burn anyway if it says file allocation error.... that's a Nero bug. Good Luck! :)

schmoe75
2006-08-31, 06:58 PM
Since you're on a PC, use thelink in my sig, get ONES, and delete that worthless softwear nero. :thumbsup

clomwac
2006-08-31, 07:44 PM
hey im on a mac and in the same boat any help would really be appreciated

schmoe75
2006-08-31, 08:04 PM
http://www.thetradersden.org/forums/showthread.php?t=20671

clomwac
2006-08-31, 09:50 PM
thank you so much

terrapinstranger
2006-09-01, 01:02 PM
I am going to d/l ONES as suggested just to further my experience. For anyone who is using Nero, I need advice I make it thru the first phase of transcoding or something like that and then it says it failed and ask if i want a log. Of course i have no freakin idea wth the log is telling me. I just want to make a DVD !!<sobs> Guess i don;t know what the problem is. it never burns it just goes thru the first long phase of the process....

terrapinstranger
2006-09-01, 01:14 PM
Now Itried using ones and I got the same thing except it hapend faster. Once i hit burn it ejects my disk and gives me an error msg.
err 28
err 02-30-11 CMD:53 vendor specific error triple.

terrapinstranger
2006-09-01, 01:40 PM
So now something interesting is happening. I decided to see if i could just burn some photos to a disk on a CDRW and al went ok. Then I decided to make a back up of some mp3, shn's etc on a DVDR and it spit it out over and over no matter what progream i use.... Someone help I am so confused.

U2Lynne
2006-09-01, 01:48 PM
Are you sure your burner will burn DVDRs? And, if so, does it burn both DVD-R and DVD+R or only one type (maybe you bought the wrong type).

terrapinstranger
2006-09-01, 01:57 PM
How can i tell. i know it burns to DVD but i did not know that there were diffrent types. i bought dvd-r's. What is the diffrence?

U2Lynne
2006-09-01, 02:22 PM
Well, it should tell you in your computer manual what type of DVDs it likes. My Mac will only burn to DVD-R, but it will read DVD-R and DVD+R. As for the difference, you can probably google it and find a technical paper about it.

ohkeepa
2006-09-01, 02:25 PM
you can try just burning as a data DVD with two folders

the VIDEO_TS folder and the AUDIO_TS folder

the video folder should have all the files in it.. the audio folder will be empty. Even though it is empty, a lot of dvd players require that it is there

terrapinstranger
2006-09-01, 04:12 PM
Thanks so much for the help. I took back the ones I had to the store and bought DVD+R's and got it working again! Thanks so much. Life is sweet again.

treehoppin
2006-09-04, 09:52 AM
The software that came with my sony, Click to DVD, will not work with the file I downloaded. It gives me the error message, does nto support clips less than 1 second long.

Am I making a mistake or do I need to install better dvd burning software. IF new software is needed, any suggestions? The ones mentioned in the FAQ are not available online anymore.

schmoe75
2006-09-04, 03:03 PM
For a PC, ONES, links in my sig :thumbsup

treehoppin
2006-09-04, 05:13 PM
thanks, I'll try that

mdm0331
2006-09-04, 09:48 PM
First, let me admit I am a total newb to this. I downloaded a DVD in .VOB format. Can anyone now tell me what to do to be able to view it. Sorry for such a newb question, just not sure how to burn it to a DVD.

I understand how to handle aud files, just not the vidoe ones.

bonzobonham
2006-09-04, 09:52 PM
You will need the correct program to burn the files to a DVD. What do you have ??

mdm0331
2006-09-04, 10:41 PM
I have Roxio CD and DVD creator 6.

bonzobonham
2006-09-04, 10:57 PM
Hmmm...I'm not familiar with that program. Since it is a DVD burning program you should be able to put the VIDEO_TS folder containing the VOB files into the burning menu somehow(add files maybe) and click burn !! If you cant make it work - try using one of the other programs available for free download, like nero - it has a free 30 day trial I believe. I use nero for all my DVD burning. You can get it at filehippo.com, or just google nero and go their site for the trial download version.

Five
2006-09-05, 12:32 AM
burn a "data dvd" (default) with the VIDEO_TS folder you downloaded as well as an empty AUDIO_TS folder. also recommended is to add an EXTRAS_TS folder and dump the artwork and info-type stuff in there. that way you have a tradeable & watchable DVD.

diggrd
2006-09-05, 12:51 PM
Heres how it's done with Roxio
http://www.thetradersden.org/forums/showpost.php?p=324995&postcount=2

schmoe75
2006-09-05, 12:59 PM
If you're on a PC, use the link in my sig for ONES...its the best DVD burning program out there :thumbsup

mdm0331
2006-09-05, 09:02 PM
Thanks for all the help

saveferals
2006-09-08, 12:39 PM
Sorry-another question. I went to burn/transfer some vob files into Nero but the files aren't transferring. I went to the files section of utorrent and tried to drag and drop-didn't work. ??? Do I need to stop seeding before I try to transfer the files for burning?

saveferals
2006-09-08, 01:43 PM
Never mind. I figured it out.

BinderFresh
2017-10-20, 06:09 AM
well, I know this is a very old thread.But I just learn some related information, so I'd like to post here. If disturbing, I am sorry.
When you open a DVD disc, usually you will find two folders there: AUDIO_TS and VIDEO_TS. AUDIO_TS folder is generally empty because it is used primarily for DVD-Audio. While VIDEO_TS folder contains files with BUP, VOB, and IFO extension. All of them play respective important roles so that a DVD player can recognize them and play DVD smoothly.
Source from http://www.videoconverterfactory.com/tips/bup-ifo-vob-converter.html
VOB (Video OBjects): VOB is the container format in DVD-Video media, which contains digital video & audio, subtitles, DVD menus and navigation contents multiplexed together into a stream form.
IFO (InFOrmation): IFO file is an important document to control the VOB file playback process.
BUP (BackUP): The BUP file is exactly the same as the IFO file, which is a backup of the IFO file.
Then how about convert VOB, you can check the above source

Unidecker
2017-10-20, 12:27 PM
you're welcome shmoe lol :P