The Traders' Den  

  The Traders' Den > Where we go to learn ..... > Technobabble
 

Notices

Technobabble Post your general Need for Help questions here.
Lossy or Lossless?
Moderators

Reply
 
Thread Tools
  #1  
Old 2008-08-15, 07:32 AM
rushfanyyz rushfanyyz is offline
292.47 GB/226.53 GB/0.77
 
Join Date: Jun 2007
ripping .wav from cds to use in sony vegas

hi, i apologise if this has been asked already but hopefully if so someone can help or point me to a thread.

i just did a multicam mix of a rush show with a seperate audio with sony vegas, my first time. all went fine until the authoring. one program (power producer) let me choose audio format but in the end the chapter marks somehow were way off and audio was acting weird when authoring.

then i tried TMPGE dvd author 3 which worked better but i got a popup saying dvd was not up to audio standard it had to be LCPM or whatever its called (i'm new to this and very tired right now) or dolby, and to select it...but when i tried to, i could not. that dvd plays fine in standalones i've tried but not pc's, and i'm thinking its because of the audio format?

now i'm starting work on an older rush that i want to use a seperate audio instead of whats on the dvd. what would you guys do at the early stage of the project with the audio to avoid this issue later on in the author stage? i can't seem to rip it with vegas in anything other than .wav.
Reply With Quote Reply with Nested Quotes
  #2  
Old 2008-08-15, 10:59 AM
Five's Avatar
Five Five is offline
TTD Staff
186.65 GB/588.32 GB/3.15
 
Join Date: Oct 2004
Location: Canada
Re: ripping .wav from cds to use in sony vegas

you'll get a better rip with EAC (exactaudiocopy.de). it double-checks what it reads and gives error reports.

I think the trouble with your video is that it wants 48kHz sample rate--so you'll have to upsample.

I'm not positive what veagas is asking for... maybe a dvd author can help you out better
__________________
Checksums Demystified EAC Config MakeTorrent WinAmp Config

Modern social theory casts a highly skeptical eye on any declaration that a group of persons is without conflict, and insists, on the contrary, that conflict is natural to groups, and even more, is essential to them. -Patrick Henry
Reply With Quote Reply with Nested Quotes
  #3  
Old 2008-08-15, 01:45 PM
saltman's Avatar
saltman saltman is offline
opposite of moderate
TTD Staff
471.23 GB/591.81 GB/1.26
 
Join Date: Dec 2004
Re: ripping .wav from cds to use in sony vegas

general process is to take old DVD and copy paste it to your HDD. then demux the resulting vob files to their elementary streams. this will be m2v and either wav (lpcm) or ac3 (dolby). import these files into the timeline in Vegas. use EAC to rip your new audio to your HDD in wav format. input this file into the timeline. align the new audio with the old audio trimming out an xtras to make it exactly the same length. remuliplex the files back to vob. this is the key to avoid double rendering. (once when the original dvd was made, second time when the audio was switched out). or you can use DVD Architect, or authoring program of you choice, to make new menus. just make sure that you have are not reencoding when you author the dvd back to vob.


your problems sound like a software issue. try sony DVD Architect.
Reply With Quote Reply with Nested Quotes
  #4  
Old 2008-08-15, 02:18 PM
pawel's Avatar
pawel pawel is offline
Lockout here
369.86 GB/672.37 GB/1.82
 
Join Date: Dec 2004
Location: Poland
Re: ripping .wav from cds to use in sony vegas

To add: if you author an NTSC DVD audio format has to be LPCM or AC3 (Dolby). MPEG audio aka MP2 is supported by PAL format only. Please take into account that total combined bitrate for both audio and video cannot exceed 9800 kbps. To keep quality audio, i.e. LPCM (1536 kbps) you have to lower max. video bitrate - average at 6500 is well enough for the source you have, higher will only enlarge files but not improve quality, and of course reduce length of the video you can fit into single disc. Use 2 pass for video rendering, if you process avi > mpeg/vob.
Reply With Quote Reply with Nested Quotes
  #5  
Old 2008-08-15, 02:26 PM
Five's Avatar
Five Five is offline
TTD Staff
186.65 GB/588.32 GB/3.15
 
Join Date: Oct 2004
Location: Canada
Re: ripping .wav from cds to use in sony vegas

great thread over here:
http://www.thetradersden.org/forums/...ad.php?t=37589

esp post #6
__________________
Checksums Demystified EAC Config MakeTorrent WinAmp Config

Modern social theory casts a highly skeptical eye on any declaration that a group of persons is without conflict, and insists, on the contrary, that conflict is natural to groups, and even more, is essential to them. -Patrick Henry
Reply With Quote Reply with Nested Quotes
  #6  
Old 2008-08-15, 03:24 PM
rushfanyyz rushfanyyz is offline
292.47 GB/226.53 GB/0.77
 
Join Date: Jun 2007
Re: ripping .wav from cds to use in sony vegas

thank you ALL so much guys!! this is great help as i'm very much new to this video editing stuff! after work tonight i'll be checking out some of the links posted.

thanks again
Reply With Quote Reply with Nested Quotes
Reply

The Traders' Den > Where we go to learn ..... > Technobabble

Similar Threads
Thread Forum Replies Last Post
want to get a dvd onto HD & then into sony vegas... - bigwurock Technobabble 16 2009-08-14 12:04 PM
sony vegas 6.0 help - wolf_in Technobabble 9 2007-02-22 01:41 PM
help with 2 cam mix with sony vegas 6 - bigwurock Technobabble 8 2006-04-21 08:52 PM


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forums


All times are GMT -5. The time now is 02:32 AM.


Powered by: vBulletin, Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright ©2004 - , TheTradersDen.org - All Rights Reserved - Hosted at QuickPacket
no new posts