The Traders' Den  

  The Traders' Den > Where we go to learn ..... > Technobabble
 

Notices

Technobabble Post your general Need for Help questions here.
Lossy or Lossless?
Moderators

Reply
 
Thread Tools
  #1  
Old 2007-02-05, 02:23 PM
teabaggins's Avatar
teabaggins teabaggins is offline
2.48 TB/2.16 TB/0.87
 
Join Date: Feb 2005
Drive not recognized by software

hey now! last week, i installed ONES and Foobar2000 for the first time, all was fine- no problems burning disks. bout 5 days later, i started up ONES to burn some disks and the program said there was no drive destination. so i shut it down and ran the roxio easy media creator(all updated) and there was the same problem. so for shits and giggles i uninstalled ONES figurin it might conflict with other software, shut down, and checked all the cables. started it up again, ran the roxio easy media creator and the same thing. my OS recognizes the drives and i can put disks in the drives with data on them and they will open. i have plenty of disk space, run windows xp, my master drive is a LiteOn LTR24102M and the slave drive is a Plextor7-16A. any help appreciated, thanks in advance
jim
__________________
When I was a kid I used to pray every night for a new bicycle.
Then I realised God doesn’t work that way, so I stole
one and prayed for forgiveness.



dvd list...
http://db.etree.org/jimoosh
Reply With Quote Reply with Nested Quotes
  #2  
Old 2007-02-05, 02:45 PM
direwolf-pgh's Avatar
direwolf-pgh direwolf-pgh is offline
On the Beach
666.18 GB/1.29 TB/1.99
 
Join Date: Dec 2005
Location: down in the basement
Re: Drive not recognized by software

No doubt a software/.dll conflict. I would uninstall Foobar/ONES/Roxio...etc..

-then full reboot for registry to update > then just one software at a time back on and more reboots between installs. Less software is more.

I had this issue with EAC..but thats a different fix altogether.
Reply With Quote Reply with Nested Quotes
  #3  
Old 2007-02-05, 03:56 PM
teabaggins's Avatar
teabaggins teabaggins is offline
2.48 TB/2.16 TB/0.87
 
Join Date: Feb 2005
Re: Drive not recognized by software

no luck. i uninstalled all of the new software and the roxio. uninstalled the drives. and only reinstalled the roxio, tried to burn a disk, but same thing. anyother suggestions
__________________
When I was a kid I used to pray every night for a new bicycle.
Then I realised God doesn’t work that way, so I stole
one and prayed for forgiveness.



dvd list...
http://db.etree.org/jimoosh
Reply With Quote Reply with Nested Quotes
  #4  
Old 2007-02-05, 04:37 PM
Audioarchivist's Avatar
Audioarchivist Audioarchivist is offline
Recording/Mastering Engineer
560.16 GB/1.94 TB/3.54
 
Join Date: Nov 2006
Location: Victoria, BC, Canada
Re: Drive not recognized by software

Check and see if there is a firmware update for the dvd drive.
Reply With Quote Reply with Nested Quotes
  #5  
Old 2007-02-05, 05:07 PM
teabaggins's Avatar
teabaggins teabaggins is offline
2.48 TB/2.16 TB/0.87
 
Join Date: Feb 2005
Re: Drive not recognized by software

both are fully updated, im wondering if its possible, that the LiteOn drive(master) has just burnt out its burning capabilities(is this possible?) affecting the dvd drive since it is the slave drive? if i switched the jumpers(Mater/Slave), would it affect my OS since or make any difference.i tried to send the files to the drive directly, and it would not let me send it to the D drive, but i could send it to the F drive, but couldnt burn it with the windows media player due to copyright BS. its a live show makes me think that the D drive is burnt out. i tried to do a system restore and it says could not be completed when rebooted. im fuckin baffled
__________________
When I was a kid I used to pray every night for a new bicycle.
Then I realised God doesn’t work that way, so I stole
one and prayed for forgiveness.



dvd list...
http://db.etree.org/jimoosh
Reply With Quote Reply with Nested Quotes
Reply

The Traders' Den > Where we go to learn ..... > Technobabble

Similar Threads
Thread Forum Replies Last Post
software help - chinajoe Technobabble 1 2007-10-09 11:49 PM
VCD to DVD software? - jessenr88 Technobabble 0 2006-08-10 08:08 PM


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forums


All times are GMT -5. The time now is 07:07 PM.


Powered by: vBulletin, Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright ©2004 - , TheTradersDen.org - All Rights Reserved - Hosted at QuickPacket
no new posts