|
Technobabble Post your general Need for Help questions here.
• Lossy or Lossless? Moderators |
|
Thread Tools |
#1
|
|||
|
|||
What hardware are you using to digitize your tapes
Hi,
For a long time I've been digitizing my tapes by running interconnects directly from my cassette deck to my Sony M-10. What are you using? I've been wondering if using a separate A/D converter and connecting it via USB to my computer might make for a better recording as the A/D converter in the M-10 is pretty old at this point. Thanks. No members have liked this post.
|
#2
|
||||
|
||||
Re: What hardware are you using to digitize your tapes
Sony does make good stuff. If you wanted to get a separate A/D converter I've had good experiences with Focusrite.
The following members like this post: Mr. Clumpy
|
#3
|
|||
|
|||
Re: What hardware are you using to digitize your tapes
I haven't done audio for quite some time, but I was using a standalone CD burner for it.
No members have liked this post.
|
#4
|
||||
|
||||
Re: What hardware are you using to digitize your tapes
I went cassette deck > Focusrite Scarlett 4i4 > laptop
__________________
DON'T MESSAGE ME FOR RE-SEEDS. I DO NOT DO THEM! AND UNLESS THEY WERE RECORDED THAT WAY, THERE WILL BE NO MORE 16 BIT VERSIONS. The following members like this post: co9ol, Mr. Clumpy
|
#5
|
|||
|
|||
Re: What hardware are you using to digitize your tapes
Tape deck direct to Tascam DA-3000 solid-state recorder. This stores input as WAV files, which I then copy to USB on the DA-3000 and copy/paste to Windoze PC for editing with Audacity.
Studio-grade kit, takes up no more room than a standard cassette deck in the music room. No members have liked this post.
|
#6
|
|||
|
|||
Re: What hardware are you using to digitize your tapes
This seems like the state of the art. At this point it's a little out of my budget's range, but definitely my end goal.
No members have liked this post.
|
#7
|
|||
|
|||
Re: What hardware are you using to digitize your tapes
Unfortunately, Tascam aren't making the DA-3000 anymore, the top of the range machine at present seems to focus on all the wrong things, such as WiFi connectivity....
No members have liked this post.
|
#8
|
|||
|
|||
Re: What hardware are you using to digitize your tapes
Well, I generally try to go the simplest route, and it depends on the media itself
RECORDING SOURCES: For Vinyl, I use the record player, and it goes to a preamp with RCA outputs, then an (RCA male to 1/8 conversion male) cable to one of my recorders For tape, same thing, but no preamp. Straight out of a Nakamichi Dragon RCA output to the RCA cable and to my recorder. from either of those source situations, I then transfer the files to my PC, create a folder using "Band - Date - Location (source) (length) (media)" and toss the media file and a text file with any pertininent info, so when I get around to editing, I have the info at hand. EXACT AUDIO COPY (https://www.exactaudiocopy.de/) CD/CDR, generally I rip using EAC ("Exact Audio Copy") a wonderful freeware program It doesn't always happen with bootlegs, but occasionally a show might be in the Database, so if you hit "ALT+G", it will search its database for your CD/CDR. Sometimes you get lucky and it's there. I use the previously listed FOLDER NAME setup, rip the wav as a single file, and save the cue file as well to the DIR created for the rip. This is done under "ACTION", then "Copy Image & Create Cue Sheet". You will then have an audio rip upon completion, can create a LOG of the rip, and proceed to editing. The audio file and any text info should be in the folder - you should verify before you forget about it. It will become an old habit soon enough. EDITING: Before you start editing the WAV file, I would recommend creating a MASTER FILE that DOES NOT GET TOUCHED. Make a copy of that, and use THAT COPY to edit. I simply name them MASTER.WAV and EDIT.WAV. Before I go messing with the audio (much), I go to CD WAVE EDITOR (http://www.milosoftware.com/en/index...ody=cdwave.php) which is not free, but extremely reasonable ($10, I believe) and load the cue file and audio file. The main reason I do things in this order is that the cue file is based on the original wav file. I name tracks, verify cue points, then save the cue file. There are times that the cue file (source WAV file) name gets changed, so if it doesn't find it, don't panic - just load up the wave file, then import the cue file. You will probably want to increase volume, do fade in/out, remove dead start space and dead end space - I do that AFTER fixing cue points, otherwise I wind up having to retrack everything. AUDIO EDITING: I use AUDACITY (https://www.audacityteam.org/) for audio editing - it's fairly simple to use, but play with it til you are comfortable. My initial audio edits are strictly amplifying the audio, and then saving the wav file - no cutting/fades or anything of that nature. Do that AFTER your tracks are separated. after your audio levels are where you are happy with it, back to CD WAVE EDITOR, import the audio and cue files, then click on what looks like a floppy disk, and it will save the individual files. Take the new first and last tracks back to Audacity, do your fade ins on the first track, and fade out on the last (for me, 2-5 seconds of screaming audience does the trick) and save the files. CONVERSION I use FRONTAH (https://www.softpedia.com/get/Multim.../Frontah.shtml) to convert audio formats. Other users may have other choices in mind. Unfortunately, the homepage seems to no longer exist, or has changed... but it is still available to download on the Softpedia site If you have any questions, or need any clarification on this, just shoot me a PM, or maybe even respond here... I will answer it to the best of my ability. OTHER HANDY STUFF You can also use a nifty little program that DOES work on FLAC files to edit metatags (ID3 v1/2). My choice isn't free, but it is reasonable and versatile. it's called "Tag & Rename" (http://www.softpointer.com/tr.htm) and I believe is $29.95, but again, it's an essential tool for me. That, and "Advanced Renamer" (https://www.advancedrenamer.com/) is also very handy, and free with the occasional popup asking you to donate - which I may just do soon... it's proven pretty invaluable for batch naming Hope this helps! No members have liked this post.
Last edited by StarslayerJo; 2024-11-30 at 03:05 PM. |
The Traders' Den |
Similar Threads | ||||
Thread | Forum | Replies | Last Post | |
help in digitize my VHS Video collection (many master - mainly Jazz, but also some cool Rock music - A-l-l-a-n-o-n | Technobabble | 10 | 2019-01-23 03:59 PM | |
What computer hardware/software to use to get cassete to computer? - mauserman | Technobabble | 52 | 2009-01-07 09:45 PM | |
The perfect way to digitize a Video 8 tape? - hanshak2015 | Technobabble | 11 | 2006-08-09 12:48 PM |
Thread Tools | |
|
|