The Traders' Den  

  The Traders' Den > Where we go to learn ..... > Technobabble
 

Notices

Technobabble Post your general Need for Help questions here.
Lossy or Lossless?
Moderators

Reply
 
Thread Tools
  #1  
Old 2024-06-11, 07:28 PM
Mr. Clumpy Mr. Clumpy is offline
73.31 GB/608.66 GB/8.30
 
Join Date: Aug 2014
What hardware are you using to digitize your tapes

Hi,

For a long time I've been digitizing my tapes by running interconnects directly from my cassette deck to my Sony M-10. What are you using? I've been wondering if using a separate A/D converter and connecting it via USB to my computer might make for a better recording as the A/D converter in the M-10 is pretty old at this point.

Thanks.
Reply With Quote Reply with Nested Quotes
  #2  
Old 2024-06-12, 10:40 AM
co9ol's Avatar
co9ol co9ol is offline
co9ol
304.03 GB/395.25 GB/1.30
 
Join Date: Nov 2006
Location: GTA Ontario, Canada
Re: What hardware are you using to digitize your tapes

Sony does make good stuff. If you wanted to get a separate A/D converter I've had good experiences with Focusrite.
Reply With Quote Reply with Nested Quotes
  #3  
Old 2024-06-12, 11:47 PM
78jazz 78jazz is online now
1.34 TB/6.03 TB/4.50
 
Join Date: Nov 2004
Re: What hardware are you using to digitize your tapes

I haven't done audio for quite some time, but I was using a standalone CD burner for it.
Reply With Quote Reply with Nested Quotes
  #4  
Old 2024-06-13, 11:43 AM
dorrcoq's Avatar
dorrcoq dorrcoq is offline
Champion of the Silent
TTD VIP
733.94 GB/7.52 TB/10.50
 
Join Date: Nov 2004
Re: What hardware are you using to digitize your tapes

I went cassette deck > Focusrite Scarlett 4i4 > laptop
__________________
DON'T MESSAGE ME FOR RE-SEEDS. I DO NOT DO THEM! AND UNLESS THEY WERE RECORDED THAT WAY, THERE WILL BE NO MORE 16 BIT VERSIONS.
Reply With Quote Reply with Nested Quotes
  #5  
Old 2024-06-20, 08:44 AM
Dreamer Theat Dreamer Theat is offline
Taping since the 1980s
8.70 GB/76.50 GB/8.80
 
Join Date: Aug 2018
Location: UK
Re: What hardware are you using to digitize your tapes

Tape deck direct to Tascam DA-3000 solid-state recorder. This stores input as WAV files, which I then copy to USB on the DA-3000 and copy/paste to Windoze PC for editing with Audacity.

Studio-grade kit, takes up no more room than a standard cassette deck in the music room.
Reply With Quote Reply with Nested Quotes
  #6  
Old 2024-06-21, 11:26 AM
Mr. Clumpy Mr. Clumpy is offline
73.31 GB/608.66 GB/8.30
 
Join Date: Aug 2014
Re: What hardware are you using to digitize your tapes

Quote:
Originally Posted by Dreamer Theat View Post
Tape deck direct to Tascam DA-3000 solid-state recorder.
This seems like the state of the art. At this point it's a little out of my budget's range, but definitely my end goal.
Reply With Quote Reply with Nested Quotes
  #7  
Old 2024-06-22, 08:28 AM
Dreamer Theat Dreamer Theat is offline
Taping since the 1980s
8.70 GB/76.50 GB/8.80
 
Join Date: Aug 2018
Location: UK
Re: What hardware are you using to digitize your tapes

Unfortunately, Tascam aren't making the DA-3000 anymore, the top of the range machine at present seems to focus on all the wrong things, such as WiFi connectivity....
Reply With Quote Reply with Nested Quotes
  #8  
Old 2024-11-30, 02:53 PM
StarslayerJo StarslayerJo is offline
405.36 GB/273.96 GB/0.68
 
Join Date: Jun 2005
Location: Florida, USA
Re: What hardware are you using to digitize your tapes

Well, I generally try to go the simplest route, and it depends on the media itself


RECORDING SOURCES:

For Vinyl, I use the record player, and it goes to a preamp with RCA outputs, then an (RCA male to 1/8 conversion male) cable to one of my recorders

For tape, same thing, but no preamp. Straight out of a Nakamichi Dragon RCA output to the RCA cable and to my recorder.

from either of those source situations, I then transfer the files to my PC, create a folder using "Band - Date - Location (source) (length) (media)" and toss the media file and a text file with any pertininent info, so when I get around to editing, I have the info at hand.


EXACT AUDIO COPY (https://www.exactaudiocopy.de/)

CD/CDR, generally I rip using EAC ("Exact Audio Copy") a wonderful freeware program

It doesn't always happen with bootlegs, but occasionally a show might be in the Database, so if you hit "ALT+G", it will search its database for your CD/CDR. Sometimes you get lucky and it's there.

I use the previously listed FOLDER NAME setup, rip the wav as a single file, and save the cue file as well to the DIR created for the rip. This is done under "ACTION", then "Copy Image & Create Cue Sheet". You will then have an audio rip upon completion, can create a LOG of the rip, and proceed to editing. The audio file and any text info should be in the folder - you should verify before you forget about it. It will become an old habit soon enough.


EDITING:

Before you start editing the WAV file, I would recommend creating a MASTER FILE that DOES NOT GET TOUCHED. Make a copy of that, and use THAT COPY to edit. I simply name them MASTER.WAV and EDIT.WAV.

Before I go messing with the audio (much), I go to CD WAVE EDITOR (http://www.milosoftware.com/en/index...ody=cdwave.php) which is not free, but extremely reasonable ($10, I believe) and load the cue file and audio file.

The main reason I do things in this order is that the cue file is based on the original wav file. I name tracks, verify cue points, then save the cue file.

There are times that the cue file (source WAV file) name gets changed, so if it doesn't find it, don't panic - just load up the wave file, then import the cue file.

You will probably want to increase volume, do fade in/out, remove dead start space and dead end space - I do that AFTER fixing cue points, otherwise I wind up having to retrack everything.


AUDIO EDITING:

I use AUDACITY (https://www.audacityteam.org/) for audio editing - it's fairly simple to use, but play with it til you are comfortable.

My initial audio edits are strictly amplifying the audio, and then saving the wav file - no cutting/fades or anything of that nature. Do that AFTER your tracks are separated.

after your audio levels are where you are happy with it, back to CD WAVE EDITOR, import the audio and cue files, then click on what looks like a floppy disk, and it will save the individual files.

Take the new first and last tracks back to Audacity, do your fade ins on the first track, and fade out on the last (for me, 2-5 seconds of screaming audience does the trick) and save the files.

CONVERSION

I use FRONTAH (https://www.softpedia.com/get/Multim.../Frontah.shtml) to convert audio formats. Other users may have other choices in mind. Unfortunately, the homepage seems to no longer exist, or has changed... but it is still available to download on the Softpedia site

If you have any questions, or need any clarification on this, just shoot me a PM, or maybe even respond here... I will answer it to the best of my ability.


OTHER HANDY STUFF

You can also use a nifty little program that DOES work on FLAC files to edit metatags (ID3 v1/2). My choice isn't free, but it is reasonable and versatile. it's called "Tag & Rename" (http://www.softpointer.com/tr.htm) and I believe is $29.95, but again, it's an essential tool for me.

That, and "Advanced Renamer" (https://www.advancedrenamer.com/) is also very handy, and free with the occasional popup asking you to donate - which I may just do soon... it's proven pretty invaluable for batch naming

Hope this helps!

Last edited by StarslayerJo; 2024-11-30 at 03:05 PM.
Reply With Quote Reply with Nested Quotes
Reply

The Traders' Den > Where we go to learn ..... > Technobabble

Similar Threads
Thread Forum Replies Last Post
help in digitize my VHS Video collection (many master - mainly Jazz, but also some cool Rock music - A-l-l-a-n-o-n Technobabble 10 2019-01-23 03:59 PM
What computer hardware/software to use to get cassete to computer? - mauserman Technobabble 52 2009-01-07 09:45 PM
The perfect way to digitize a Video 8 tape? - hanshak2015 Technobabble 11 2006-08-09 12:48 PM


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forums


All times are GMT -5. The time now is 09:26 AM.


Powered by: vBulletin, Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - , TheTradersDen.org - All Rights Reserved - Hosted at QuickPacket