[RetroDude83]

Just tested EAC, haven't used it in ages and here is the info of the log file, does the paek level ahve to be at about 100% as well? I remeber when doing it on my old PC years back it used to be like that. here's the log info of 2 tracks i saved

EAC extraction logfile from 3. August 2006, 22:54 for CD
Unbekannter Künstler / Unbekannter Titel

Used drive : SONY DVD RW DW-G120A Adapter: 3 ID: 0
Read mode : Secure with C2, accurate stream, disable cache
Combined read/write offset correction : 0
Overread into Lead-In and Lead-Out : No

Used output format : Internal WAV Routines
44.100 Hz; 16 Bit; Stereo

Other options :
Fill up missing offset samples with silence : Yes
Delete leading and trailing silent blocks : No
Native Win32 interface for Win NT & 2000


Track 1
Filename C:\Test\Track01.wav

Pre-gap length 0:00:02.00

Peak level 79.2 %
Track quality 100.0 %
Copy CRC 60115974
Copy OK

Track 2
Filename C:\Test\Track02.wav

Peak level 68.5 %
Track quality 99.9 %
Copy CRC 7575F1E0
Copy OK

No errors occured


End of status report
---

are these settings okay? another thing I realized and completely forgot about is the pre-gap, usually 2 sec on the first track of the disc, is EAC able to remove it somehow if yes where can i enable it. it's important for the 2CD shows as I will always have to remove the 2sec gap of the frist track of cd#2 to get proper track transitions finally. it would be a pain in the butt to to do it manually but if i've got no other choise...