Quote:
|
Originally Posted by mort
MIC WAS LIKELY OVERLOADED CHEAP MICS CAN NOT HANDLE HIGH SOUND PRESSURE LEVELS
SO NO MATTER HOW LOW THE RECORD LEVELS ARE IF THE MIC IS OVERLOADED THEN YOU WILL GET THIS PROBLEM
IT IS CAUSED WHEN THE MIC DIAPHRAM IS OVER EXTENDED
JUST LIKE A SPEAKER BUT IN REVERSE !
|
I believe mort is correct.
when you set levels on your deck you can see if its going over the top and turn it down a little. the only other place it could have overloaded is at the microphone.
No members have liked this post.