i've done plenty of hard drive installations, so i hope at least the installation and partition was fine. the only problem i can think of is this was a raid 0, and i'm pretty new to raid. the 2 drives (2x 36gb) were in my old machine as a raid 0 system drive (they were installed & everything by the company i bought the old pc from), so when i made this new machine i thought i'd try to add them in the same way. should be no problem huh? they showed up fine in the raid configuration tool from my mobo (asus k8vse, same mobo as the old pc), so i created a raid 0 with the 2 of them, restarted (user profiles still fine) and then created a partition spanning the entire drive (~70gb or whatever it ended up) and formatted and then rebooted. this is where all the "setting cannot be found, a temporary profile will be created. all setting will be discarded when you restart" started.
think thats about it. lemme know if i left anything out & thanks for the help.
Quote:
|
Originally Posted by diggrd
Turned out to be something with available disk space
|
not an issue here. at least 40gb free on all my drives, 110 on my system.
No members have liked this post.