Re: several questions, need advise!!!
Just tested EAC, haven't used it in ages and here is the info of the log file, does the paek level ahve to be at about 100% as well? I remeber when doing it on my old PC years back it used to be like that. here's the log info of 2 tracks i saved
EAC extraction logfile from 3. August 2006, 22:54 for CD
Unbekannter Künstler / Unbekannter Titel
Used drive : SONY DVD RW DW-G120A Adapter: 3 ID: 0
Read mode : Secure with C2, accurate stream, disable cache
Combined read/write offset correction : 0
Overread into Lead-In and Lead-Out : No
Used output format : Internal WAV Routines
44.100 Hz; 16 Bit; Stereo
Other options :
Fill up missing offset samples with silence : Yes
Delete leading and trailing silent blocks : No
Native Win32 interface for Win NT & 2000
Track 1
Filename C:\Test\Track01.wav
Pre-gap length 0:00:02.00
Peak level 79.2 %
Track quality 100.0 %
Copy CRC 60115974
Copy OK
Track 2
Filename C:\Test\Track02.wav
Peak level 68.5 %
Track quality 99.9 %
Copy CRC 7575F1E0
Copy OK
No errors occured
End of status report
---
are these settings okay? another thing I realized and completely forgot about is the pre-gap, usually 2 sec on the first track of the disc, is EAC able to remove it somehow if yes where can i enable it. it's important for the 2CD shows as I will always have to remove the 2sec gap of the frist track of cd#2 to get proper track transitions finally. it would be a pain in the butt to to do it manually but if i've got no other choise...
No members have liked this post.
|