If you want to check if it's mono or not, copy the left channel to a new CEP window, then copy the right channel and mix-paste it out of phase (use overlap(mix) and check the "invert" box). If the left is identical to the right, you will get a perfectly flat line, and the recording is therefore mono.
Quote:
|
Originally Posted by Punkishlyevil
So is this recording shareable?
|
MD is an acceptable source... the only thing that's touchy is the Xing software used for extraction. This was a few years back, who knows if that one CDR copied off the DAT still works or even exists. Or, for that matter, if the DAT has been taped over by now. I'd say this is okay to share, but RainDawg gets the final word on this.
No members have liked this post.